using a cart - Kayak Fishing Adventures on Big Water’s Edge

taggermike · 08-10-2010, 06:54 AM

I made a cart out of PVC pipe, wheels from Harbour Fraght, and a 1/2 copper water pipe for an axle. It worked for years. It didn't collapse and stow but it supported my kayaks and rolled well. I used it many times to carry the kayak up and down the steep ass road to salt Creek in OC. The only time it let me down is when I accidently rolled it off an 18" curb with a fully loaded yak on it. It took about 10 minutes to fix with a PVC coupler. MIke

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-10-2010, 06:54 AM	#9
taggermike Senior Member Join Date: May 2007 Location: Chula Vista Posts: 1,589	I made a cart out of PVC pipe, wheels from Harbour Fraght, and a 1/2 copper water pipe for an axle. It worked for years. It didn't collapse and stow but it supported my kayaks and rolled well. I used it many times to carry the kayak up and down the steep ass road to salt Creek in OC. The only time it let me down is when I accidently rolled it off an 18" curb with a fully loaded yak on it. It took about 10 minutes to fix with a PVC coupler. MIke