Malibu Warranty - 2nd owner? - Kayak Fishing Adventures on Big Water’s Edge

Regor · 07-18-2010, 06:08 PM

I've read on the Malibu website that the warranty is for the original owner only, but has anyone heard of any instances when Malibu has stood behind their Kayaks 100% when it's an obvious materials defect?

Pic is a set of holes, with a pencil nearby for size. It's not from wear and tear or rough use.

See pic:

Lets_Fish · 07-18-2010, 10:27 PM

I purchased a Malibu X-13 at their parking lot sale last month and it has some "pin holes" around one of the scuppers. I just gooped the heck out of it both inside and out like Andy mentioned in another post. The holes on mine are not as large as the ones shown in your photo though. Call Malibu and ask if they would cover a portion (maybe some credit towards a replacement yak).

Regor · 08-08-2010, 01:08 PM

I've supported the yak in the driveway and filled up with some water, with zero leaks.

I've only filled up enough to cover the 1st inch of the scuppers from inside the yak, with no leaks. Of course, it appears that the seam of the scupper is much higher.

How much water can go into the yak without fear of making matters worse? At 8lbs per gallon, that could get heavy fast.

Gino · 08-08-2010, 01:49 PM

Regor, What you could do is use 3m, or Goop and smear it inside and around those little pinholes just to be sure. If you use 3m make sure you let it set for 2 days or so.
That should fix your problem.

There is no warranty for secound hand owners! but Im sure Andy at OEX Sunset Beach could possibly figure out a solution if it becomes a problem, Id give him a call And see what he has to offer.
Ive seen the work they do on kayaks and patches, Amazing stuff.

Regor · 08-08-2010, 02:11 PM

Thanks Gino.

I was also trying to figure out if I had any secondary (or 3rd or 4th) holes, or naked to the eye cracks. ( the reason for filling up the yaks interior with water)

08-08-2010, 01:08 PM	#3
Regor Greg Join Date: May 2010 Location: Chula Vista, ca Posts: 509	How much water can in the Kayak to troubleshoot I've supported the yak in the driveway and filled up with some water, with zero leaks. I've only filled up enough to cover the 1st inch of the scuppers from inside the yak, with no leaks. Of course, it appears that the seam of the scupper is much higher. How much water can go into the yak without fear of making matters worse? At 8lbs per gallon, that could get heavy fast.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-18-2010, 10:27 PM	#2
Lets_Fish Senior Member Join Date: Oct 2009 Location: Wildomar, CA. Posts: 294	I purchased a Malibu X-13 at their parking lot sale last month and it has some "pin holes" around one of the scuppers. I just gooped the heck out of it both inside and out like Andy mentioned in another post. The holes on mine are not as large as the ones shown in your photo though. Call Malibu and ask if they would cover a portion (maybe some credit towards a replacement yak).

08-08-2010, 01:49 PM	#4
Gino Senior Member Join Date: Mar 2009 Posts: 520	Regor, What you could do is use 3m, or Goop and smear it inside and around those little pinholes just to be sure. If you use 3m make sure you let it set for 2 days or so. That should fix your problem. There is no warranty for secound hand owners! but Im sure Andy at OEX Sunset Beach could possibly figure out a solution if it becomes a problem, Id give him a call And see what he has to offer. Ive seen the work they do on kayaks and patches, Amazing stuff.

08-08-2010, 02:11 PM	#5
Regor Greg Join Date: May 2010 Location: Chula Vista, ca Posts: 509	Thanks Gino. I was also trying to figure out if I had any secondary (or 3rd or 4th) holes, or naked to the eye cracks. ( the reason for filling up the yaks interior with water)