Leaky Boat - Finally diagnosed

[mo2vation]

Originally Posted by Iceman

With pin holes in the scupper I like to hit inside and out if possible with marine goop after completely drying and possibly scuffing the surface with 80 grit sand paper.

Too hard to weld.

Thanks, Ice.

The only hatch I have on the Prowler 15 is the bow hatch... no way I can reach back to the TW.

I roughed up the inside of the scupper from the outside of the boat ( ) and slathered in a fine cylinder of the Lexel snot.

We'll see.

I'm feeling pretty good about it. It was a substantial leak, but it was only in one place. Shouldn't be too hard to knock it down.

I'm taking the boat up to the Sierras this weekend for opener - so I'll be on stupid water for long hours. I'll know more tomorrow and likely give it another coat before I leave on Thursday night.

-K