Kayak cart inner tube? - Kayak Fishing Adventures on Big Water’s Edge

Holy Mackerel · 06-09-2009, 08:02 AM

Anyone know where to pick up some replacement tubes? For this type of cart?

zinkysd · 06-09-2009, 08:16 AM

Dixieline on Miramar Rd. Thats where I got mine.

Ken

Holy Mackerel · 06-09-2009, 08:27 AM

Thanks Ken, close to my work too!

dsafety · 06-09-2009, 09:27 AM

You can get replacement wheels at Harbor Freight Tools.

Bob

Zed · 06-09-2009, 09:37 AM

How about in OC?

I need a couple.

so cal shaggy · 06-09-2009, 02:56 PM

Quote:

Originally Posted by Zed

How about in OC?

I need a couple.

Harbor freight on Goldenwest and Mcfadden in the Fresh and Easy shopping center

Iceman · 06-09-2009, 03:39 PM

Harbor freight wheels will not work on that cart........I have looked. They are made with bearings rather than bushings and will not fit the axle.

Kevin · 06-09-2009, 04:32 PM

I've purchased the inner tubes at Denault's True Value Hardware before.

Zed · 06-10-2009, 08:11 AM

Thanks Kev!

Matt · 06-10-2009, 08:16 AM

Some bike shops will have them too, for the jogging strollers

Kiyo · 06-10-2009, 09:34 AM

I used the inner tubes from Harbor Freight but getting those tires off the rim is a workout.

Holy Mackerel · 06-10-2009, 09:39 AM

Quote:

Originally Posted by Kiyo

getting those tires off the rim is a workout.

Any helpful suggestions you have learned by doing it by trial and error?

467echo · 06-10-2009, 10:03 AM

if you are at the bike shop, just have them do it for a few bucks. You don't want to pinch the line and have to buy another tube. Good Luck

bellcon · 06-10-2009, 01:12 PM

I went to harbor frieght yesterday
picked up 2 of the tubes
item #38354 (under 4 bucks each i think)
3.5" / 4"
They fit perfectly
You need tire irons to pop the tire off one side of the rim
the trick in putting it back on is to use lots of lube!!!
I used some aerosol white lithium grease i had
It was easy with the lube
Impossible without

Kiyo · 06-10-2009, 04:02 PM

Quote:

Originally Posted by bellcon

Impossible without

It is possible. It took me about an hour with a couple of screwdrivers and a couple of vise grips. Thanks for the lube tip though Don! Gonna have to do it that way next time for sure.

joe tuipala · 06-11-2009, 08:10 AM

The Best lube for Tires is Dishwashing liquid . Use a patch kit from the bikeshop and save some money and learn how for road trips in Baja .

Holy Mackerel · 06-11-2009, 08:25 AM

great info, thanks for all who responded!

Billy V · 06-11-2009, 10:55 AM

Marshall's Industrial Hardware, on Production Ave.
----Off of Miramar Road.

This place have every nut and bolt, is any material, or style.
Seriously.

06-09-2009, 08:02 AM	#1
Holy Mackerel Señor member Join Date: Mar 2005 Location: San Diego, CA Posts: 1,627	Kayak cart inner tube? Anyone know where to pick up some replacement tubes? For this type of cart?

06-09-2009, 09:37 AM	#5
Zed BANNED Join Date: Mar 2005 Location: W of 5 Posts: 1,265	How about in OC? I need a couple. __________________ Give a man a fish and he'll eat for a day. Give a fish a man and he'll eat for a week.

06-09-2009, 03:39 PM	#7
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	Harbor freight wheels will not work on that cart........I have looked. They are made with bearings rather than bushings and will not fit the axle. __________________

06-10-2009, 08:11 AM	#9
Zed BANNED Join Date: Mar 2005 Location: W of 5 Posts: 1,265	Thanks Kev! __________________ Give a man a fish and he'll eat for a day. Give a fish a man and he'll eat for a week.

06-10-2009, 08:16 AM	#10
Matt Support your local pangas Join Date: Feb 2007 Location: Lj Posts: 976	Some bike shops will have them too, for the jogging strollers __________________ Thanks Matt F.

06-09-2009, 08:16 AM	#2
zinkysd Hobie Fishing Team Join Date: Apr 2007 Posts: 145	Dixieline on Miramar Rd. Thats where I got mine. Ken

06-09-2009, 08:27 AM	#3
Holy Mackerel Señor member Join Date: Mar 2005 Location: San Diego, CA Posts: 1,627	Thanks Ken, close to my work too!

06-09-2009, 09:27 AM	#4
dsafety Olivenhain Bob Join Date: May 2008 Location: Olivenhain, CA Posts: 1,121	You can get replacement wheels at Harbor Freight Tools. Bob

06-09-2009, 04:32 PM	#8
Kevin Member Join Date: Mar 2005 Posts: 78	I've purchased the inner tubes at Denault's True Value Hardware before.

06-10-2009, 09:34 AM	#11
Kiyo Senior Member Join Date: Apr 2005 Location: Anaheim Posts: 122	I used the inner tubes from Harbor Freight but getting those tires off the rim is a workout. __________________

06-10-2009, 10:03 AM	#13
467echo Rookie of the Month Club Join Date: Nov 2008 Location: Mira Mesa Posts: 483	if you are at the bike shop, just have them do it for a few bucks. You don't want to pinch the line and have to buy another tube. Good Luck __________________ they are getting bigger....

06-10-2009, 01:12 PM	#14
bellcon Senior Member Join Date: Jul 2007 Location: San Pedro Posts: 999	I went to harbor frieght yesterday picked up 2 of the tubes item #38354 (under 4 bucks each i think) 3.5" / 4" They fit perfectly You need tire irons to pop the tire off one side of the rim the trick in putting it back on is to use lots of lube!!! I used some aerosol white lithium grease i had It was easy with the lube Impossible without

06-11-2009, 08:10 AM	#16
joe tuipala Junior Join Date: Aug 2006 Location: clairemont/sd Posts: 27	The Best lube for Tires is Dishwashing liquid . Use a patch kit from the bikeshop and save some money and learn how for road trips in Baja .

06-11-2009, 08:25 AM	#17
Holy Mackerel Señor member Join Date: Mar 2005 Location: San Diego, CA Posts: 1,627	great info, thanks for all who responded!

06-11-2009, 10:55 AM	#18
Billy V Senior Member Join Date: Sep 2006 Location: Bay Ho Posts: 1,382	Marshall's Industrial Hardware, on Production Ave. ----Off of Miramar Road. This place have every nut and bolt, is any material, or style. Seriously.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode