|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
06-11-2018, 11:22 AM | #1 |
Senior Member
Join Date: Sep 2015
Location: SD
Posts: 104
|
DIY transducer scupper with hot water?
Sent from my iPhone using Tapatalk |
06-11-2018, 12:14 PM | #2 |
Senior Member
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
|
I think there are other alternatives out there that are a better/safer way about it.
Do you have a rudder? If not, my suggestion would be a rear keel DIY setup. I had that on my old Ride (original design close to the Pescador) and it was fantastic... |
06-11-2018, 12:30 PM | #3 |
Baitless on Baja
Join Date: May 2013
Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay
Posts: 4,250
|
Look at the Berley Pro transducer mount, it will reduce
drag and protect your transducer at the same time.
__________________
http://www.mako-ville.com Home 760-630-4470 Cell 760-520-2514 YES YOU CAN |
06-11-2018, 12:47 PM | #4 |
Administrator
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
|
I would not attempt to manipulate the area to accommodate a transducer
__________________
|
06-11-2018, 02:45 PM | #5 |
.......
Join Date: Jan 2009
Posts: 1,509
|
I did this with an old Fish and Dive I use for hoop netting. I used a heat gun not hot water. Mine has worked fine, with no issues but it's not an easy thing to do, and I would not recommend it. The deal is it's very easy to make the plastic too thin by stretching it to much, and you cant easily add reinforcement. If you are set on trying this I can take some pics of mine and tell you what I did to make it seaworthy, but once again I would not recommend it.
I mounted inset transducers in four kayaks before the commercial ones were available, using four different methods. They all worked but this was probably the hardest way to do it. |
06-11-2018, 02:49 PM | #6 |
.......
Join Date: Jan 2009
Posts: 1,509
|
|
06-11-2018, 05:18 PM | #7 |
Senior Member
Join Date: Sep 2015
Location: SD
Posts: 104
|
ok just as I suspected, thanks everyone for the advice. I didnt wanna butcher my sweet ride anyways. I think ill just get creative with hydrodynamic goop sculpting.
|
06-12-2018, 09:15 AM | #8 | |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Quote:
Andy |
|
06-12-2018, 09:31 AM | #9 |
Senior Member
Join Date: May 2007
Location: Palos Verdes
Posts: 1,857
|
Rudder mount
It's tough to get the kelp and eel Grass off of the transducer when it's mounted way back there...
This method might work in fresh water but no so much out on the Big Pond... Check with Andy...he had an over the side mount on his kayak at the tourney. There is nothing wrong with mounting inside the yak and shooting your sonar through the plastic. You don't get temp readings but at least you aren't cleaning crap off your transducer all the time.
__________________
Jim / Saba Slayer |
06-12-2018, 09:47 AM | #10 |
Senior Member
Join Date: Aug 2015
Location: Agoura Hills
Posts: 166
|
Thanks Jim, that makes sense.
Andy |
06-13-2018, 08:45 AM | #11 |
Senior Member
Join Date: Jul 2006
Location: Fullerton
Posts: 1,360
|
Hey Jim (Day), do you still have the post on here somewhere that has the mount using neoprene and aluminum plate that puts the ducer in direct contact with the water? My post was on Jason's old site and the forums are no longer accessible. I know it sparked a lot of spirited conversation, but it worked very well for me and I would not be averse to doing it again.
|
06-13-2018, 12:21 PM | #12 | |
Senior Member
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
|
Quote:
As Jim said, its not ideal for heavy kelp or eel grass, but for everything else it would work just fine. |
|
Thread Tools | |
Display Modes | |
|
|