DIY transducer scupper with hot water? - Kayak Fishing Adventures on Big Water’s Edge

Saba Slayer · 06-12-2018, 08:31 AM

It's tough to get the kelp and eel Grass off of the transducer when it's mounted way back there...
This method might work in fresh water but no so much out on the Big Pond...
Check with Andy...he had an over the side mount on his kayak at the tourney.
There is nothing wrong with mounting inside the yak and shooting your sonar through the plastic. You don't get temp readings but at least you aren't cleaning crap off your transducer all the time.

06-12-2018, 08:31 AM	#9
Saba Slayer Senior Member Join Date: May 2007 Location: Palos Verdes Posts: 1,872	Rudder mount It's tough to get the kelp and eel Grass off of the transducer when it's mounted way back there... This method might work in fresh water but no so much out on the Big Pond... Check with Andy...he had an over the side mount on his kayak at the tourney. There is nothing wrong with mounting inside the yak and shooting your sonar through the plastic. You don't get temp readings but at least you aren't cleaning crap off your transducer all the time. __________________ Jim / Saba Slayer

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode