Any interest in a SD Bay based Mother Ship? - Kayak Fishing Adventures on Big Water’s Edge

Shimano Penn · 05-22-2017, 07:12 PM

Hey guys, I have not been active here since I sold my PA14 and bought a Grady. Sorry for that but I just felt too limited; I used to fish at La Jolla a lot, sometimes I would fish La Jolla, and when I felt really adventurous I would fish La Jolla. I absolutely loved kayak fishing but it just seemed so restricted. I recently came across a boat that is all set up to perform as a mother ship; dingy davit, expansive deck space, comfortable salon and galley and huge bait tank. It could easily take 8-10 maybe 12 yaks to the Coronados or local kelp beds for a day trip or maybe 6 to SCI or tanner for a multi day excursion. LJYT are great but there are YFT, BFT, dorado and more within reach of SD. What do you think? Rates would be perhaps a tad higher than the usual 3/4 to 1.5 day trips on the party boats because there would be loading and unloading of kayaks but there would be extremely "limited loads" compared to those boats. What do you think? Is there a market for this?

YakAnglerUSMC · 05-22-2017, 07:13 PM

I would definitely be interested in something like that

Sent from my SM-G930V using Tapatalk

makobob · 05-22-2017, 07:27 PM

Quote:

Originally Posted by Shimano Penn

Hey guys, I have not been active here since I sold my PA14 and bought a Grady. Sorry for that but I just felt too limited; I used to fish at La Jolla a lot, sometimes I would fish La Jolla, and when I felt really adventurous I would fish La Jolla. I absolutely loved kayak fishing but it just seemed so restricted. I recently came across a boat that is all set up to perform as a mother ship; dingy davit, expansive deck space, comfortable salon and galley and huge bait tank. It could easily take 8-10 maybe 12 yaks to the Coronados or local kelp beds for a day trip or maybe 6 to SCI or tanner for a multi day excursion. LJYT are great but there are YFT, BFT, dorado and more within reach of SD. What do you think? Rates would be perhaps a tad higher than the usual 3/4 to 1.5 day trips on the party boats because there would be loading and unloading of kayaks but there would be extremely "limited loads" compared to those boats. What do you think? Is there a market for this?

More info needed, which Grady, size bait tank, overnight accomadations, galley seating, how to store yaks? Thanks.

Shimano Penn · 05-22-2017, 07:45 PM

Quote:

Originally Posted by makobob

More info needed, which Grady, size bait tank, overnight accomadations, galley seating, how to store yaks? Thanks.

No Mako, not my grady, this is a 50 footer with sleeping for 6+ crew but lets start with the day trip idea. Yak storage would be on deck, I'm thinking pool noodles & tie down. Its an expansive forward deck area. 4-5 scoop bait tank, split. We can work on the details, I'm just judging general interest at this point. Again not my boat, just a boat I fished on Saturday that is available for charter and looks to have great potential as a mother ship.

makobob · 05-22-2017, 07:55 PM

Thanks, details could make it work, would like to here more and sea pictures, engines, bunks, galley, seating and racking for yaks, running speed and charging for our electronics. Leave tommorow night for week in Baja will check it out upon my return. Again thanks for posting.

jbl_91762 · 05-22-2017, 08:17 PM

Very Interested especially if it can be done on a weekend. And like others pics and more details...cost estimate?

Baja_Traveler · 05-23-2017, 06:50 AM

If this mother ship can handle Hobie PA's I know I would be interested, as well as many others I'm sure. We are all currently excluded from the very few mother ship charters that go out because they all hand launch over the rail and the PA's are just too heavy.

PapaDave · 05-23-2017, 02:04 PM

Quote:

Originally Posted by Baja_Traveler

If this mother ship can handle Hobie PA's I know I would be interested, as well as many others I'm sure. We are all currently excluded from the very few mother ship charters that go out because they all hand launch over the rail and the PA's are just too heavy.

What he said... I would be up for that.

I have a 20 foot CC that I have been trying to figure out how to get the kayak on board...

goldenglory18 · 05-23-2017, 02:22 PM

I'd totally be down for a Mother Ship trip. I would obviously need details and info before committing though.

Quote:

Originally Posted by PapaDave

I have a 20 foot CC that I have been trying to figure out how to get the kayak on board...

Challenge accepted! LOL

YakHanded · 05-23-2017, 02:58 PM

Quote:

Originally Posted by PapaDave

What he said... I would be up for that.

I have a 20 foot CC that I have been trying to figure out how to get the kayak on board...

Tow it!

makobob · 05-23-2017, 04:43 PM

Quote:

Originally Posted by PapaDave

What he said... I would be up for that.

I have a 20 foot CC that I have been trying to figure out how to get the kayak on board...

I could show you how to do it, but then I would have to fish with you. You don't fish Baja and I don't fish California. Bummer, Tight Lines.

Shimano Penn · 05-23-2017, 06:37 PM

Okay folks like the title says I was just judging interest, I will pass this along to the boat owner as well as a link to this thread and if he is interested I'm sure he will provide all the details requested. I'm not involved, just happened across a boat that I thought would be perfect. More or less just playing match maker here, it's not my place to offer specifics.

BIG JOAQUIN · 05-23-2017, 08:34 PM

Interested. You Might have the opportunity to be a sole source supplier with the islander not doing it anymore.

Denis_Ruso · 05-24-2017, 08:14 AM

Quote:

Originally Posted by BIG JOAQUIN

Interested. You Might have the opportunity to be a sole source supplier with the islander not doing it anymore.

Islander is doing it, just raised their prices.

05-22-2017, 07:12 PM	#1
Shimano Penn Junior Join Date: Nov 2014 Posts: 22	Any interest in a SD Bay based Mother Ship? Hey guys, I have not been active here since I sold my PA14 and bought a Grady. Sorry for that but I just felt too limited; I used to fish at La Jolla a lot, sometimes I would fish La Jolla, and when I felt really adventurous I would fish La Jolla. I absolutely loved kayak fishing but it just seemed so restricted. I recently came across a boat that is all set up to perform as a mother ship; dingy davit, expansive deck space, comfortable salon and galley and huge bait tank. It could easily take 8-10 maybe 12 yaks to the Coronados or local kelp beds for a day trip or maybe 6 to SCI or tanner for a multi day excursion. LJYT are great but there are YFT, BFT, dorado and more within reach of SD. What do you think? Rates would be perhaps a tad higher than the usual 3/4 to 1.5 day trips on the party boats because there would be loading and unloading of kayaks but there would be extremely "limited loads" compared to those boats. What do you think? Is there a market for this?

05-22-2017, 07:55 PM	#5
makobob Baitless on Baja Join Date: May 2013 Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay Posts: 4,250	Thanks, details could make it work, would like to here more and sea pictures, engines, bunks, galley, seating and racking for yaks, running speed and charging for our electronics. Leave tommorow night for week in Baja will check it out upon my return. Again thanks for posting. __________________ http://www.mako-ville.com Home 760-630-4470 Cell 760-520-2514 YES YOU CAN

05-23-2017, 08:34 PM	#13
BIG JOAQUIN Member Join Date: Jan 2016 Location: C'mont Posts: 33	Interested. You Might have the opportunity to be a sole source supplier with the islander not doing it anymore. __________________ _________________________________________ 2015 Hobie Outback 20lb - Cousins Raze 808HT/Okuma Komodo 30lb - Penn Carnage 800M/Penn Fathom 25N Star 40lb - Penn Carnage II 700H/Penn Fathom 30 LD2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-22-2017, 07:13 PM	#2
YakAnglerUSMC Junior Join Date: Jul 2016 Location: San Diego Posts: 28	I would definitely be interested in something like that Sent from my SM-G930V using Tapatalk

05-22-2017, 08:17 PM	#6
jbl_91762 Senior Member Join Date: Jun 2016 Posts: 347	Very Interested especially if it can be done on a weekend. And like others pics and more details...cost estimate?

05-23-2017, 06:50 AM	#7
Baja_Traveler Senior Member Join Date: Nov 2005 Location: Table 17, Bay Park Fish Co. Posts: 943	If this mother ship can handle Hobie PA's I know I would be interested, as well as many others I'm sure. We are all currently excluded from the very few mother ship charters that go out because they all hand launch over the rail and the PA's are just too heavy.

05-23-2017, 06:37 PM	#12
Shimano Penn Junior Join Date: Nov 2014 Posts: 22	Okay folks like the title says I was just judging interest, I will pass this along to the boat owner as well as a link to this thread and if he is interested I'm sure he will provide all the details requested. I'm not involved, just happened across a boat that I thought would be perfect. More or less just playing match maker here, it's not my place to offer specifics.