Share Your Innovations - Kayak Fishing Adventures on Big Water’s Edge

fongman · 06-12-2016, 04:20 PM

I haven't posted on here in a while, so I'll share a few things I made. The first is a fly rod holder. I have some extra RAM accessories so I made it for a RAM 1.5" ball mount. I originally used a bungee cord and lashing hook (OEX) to secure the rod to the rod holder. Recently I modified it to have a rotating collar, like the Scotty Power Lock.

The next are check valves. These will be used in place of the seat plugs in my Hobie Adventure. The parts list: 3/4" PVC male adapter, 3/4" PVC pipe, syringe plunger, and 1/8" SS rod. The video I saw used a 3/4" acrylic ball, but I couldn't find any for the right price. Instead, I found a 6-pack of syringes at Party City for $7. I cut the rod at the indentation, then filed the fins of the plunger so it would slide in the 3/4" PVC pipe. Do not push the pipe all the way into the adapter because you want to allow a gap for more water to pass through. The hole I drilled in the pipe allows the plunger about an 1/8" of clearance from the top. The threaded portion was sawed off above the last 3 threads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-12-2016, 04:20 PM	#11
fongman Senior Member Join Date: Mar 2005 Posts: 116	I haven't posted on here in a while, so I'll share a few things I made. The first is a fly rod holder. I have some extra RAM accessories so I made it for a RAM 1.5" ball mount. I originally used a bungee cord and lashing hook (OEX) to secure the rod to the rod holder. Recently I modified it to have a rotating collar, like the Scotty Power Lock. The next are check valves. These will be used in place of the seat plugs in my Hobie Adventure. The parts list: 3/4" PVC male adapter, 3/4" PVC pipe, syringe plunger, and 1/8" SS rod. The video I saw used a 3/4" acrylic ball, but I couldn't find any for the right price. Instead, I found a 6-pack of syringes at Party City for $7. I cut the rod at the indentation, then filed the fins of the plunger so it would slide in the 3/4" PVC pipe. Do not push the pipe all the way into the adapter because you want to allow a gap for more water to pass through. The hole I drilled in the pipe allows the plunger about an 1/8" of clearance from the top. The threaded portion was sawed off above the last 3 threads.