Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 05-16-2016, 12:41 PM   #1
PescadorPete
Senior Member
 
PescadorPete's Avatar
 
Join Date: Mar 2005
Location: Leucadia, CA
Posts: 261
If you want to go old school, the old ProGear 251 is about the same size as the Calcutta. Guts are Jigmaster so parts will be available forever. I replaced the stock 5:1 gears with Jigmaster 4:1. I think the Jigmaster 506HS 5:1 gears also fit. Replace the stock drags with a Jigmaster HT-100 drag stack. No anti-reverse bearing which always seems to fail in my Calcutta. It also has a spring loaded dog which is more reliable than the ambassador style in the 400.

If you want to drop some serious coin, the Penn TRQ-15 is also about the same size. The Fathom 15 is a less expensive alternative. They are 6:1 which is not the best for cranking power. You can change the TRQ-15 to 4.8:1 gears but that will set you back another $50. There are aftermarket lower speed gears for the Fathom.

I'm really surprised how long my 400 has lasted, given the number of times is has been underwater .





PescadorPete is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 05:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.