Battery dry box install - Kayak Fishing Adventures on Big Water’s Edge

FISH11 · 05-13-2016, 11:58 AM

On both my Malibu's I use strips of the 2" velcro and also use 3M weather stripping glue to better secure the velcro to the inside of the kayak (flat on the bottom on either side of the center hatch bag) and some on the matching strips to the bottom of the battery pelican box. I always remove it during transport and storage at home.

Reiner · 05-13-2016, 12:31 PM

Quote:

Originally Posted by FISH11

On both my Malibu's I use strips of the 2" velcro and also use 3M weather stripping glue to better secure the velcro to the inside of the kayak (flat on the bottom on either side of the center hatch bag) and some on the matching strips to the bottom of the battery pelican box. I always remove it during transport and storage at home.

could you by chance take a picture of yours. Thanks
(hopefully not too much to ask)

FISH11 · 05-13-2016, 07:50 PM

Quote:

Originally Posted by Reiner

could you by chance take a picture of yours. Thanks
(hopefully not too much to ask)

Here's some quick pictures using my cell phone. Hope it helps.

Reiner · 05-13-2016, 10:01 PM

that helped. thx for the pics Fish11

Dave Legacy · 05-14-2016, 01:14 PM

Reiner,

I'm using industrial grade 3M strips to hold my box down to my deck and using bungees as extra security:

05-13-2016, 11:58 AM	#1
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,643	On both my Malibu's I use strips of the 2" velcro and also use 3M weather stripping glue to better secure the velcro to the inside of the kayak (flat on the bottom on either side of the center hatch bag) and some on the matching strips to the bottom of the battery pelican box. I always remove it during transport and storage at home. __________________ MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids )

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-13-2016, 10:01 PM	#4
Reiner Member Join Date: Apr 2016 Posts: 71	that helped. thx for the pics Fish11

05-14-2016, 01:14 PM	#5
Dave Legacy Senior Member Join Date: Mar 2015 Location: Hacienda Heights, CA Posts: 427	Reiner, I'm using industrial grade 3M strips to hold my box down to my deck and using bungees as extra security: