Live-well pumps that are over the sides or through the scupper holes? - Kayak Fishing Adventures on Big Water’s Edge

Iceman · 01-22-2016, 09:58 AM

over the side is self priming as impeller is below water line. thru hull is below water line. Thru scupper needs a means of priming as impeller is above water line. Hobie uses a pick up tube with a 90 degree angle pointed forward. Momentum pushes water up to the impeller, once primed should run the duration of the battery, obviously a timer switch would be a bad idea in this configuration..........or any configuration IMO

01-22-2016, 09:58 AM	#5
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	over the side is self priming as impeller is below water line. thru hull is below water line. Thru scupper needs a means of priming as impeller is above water line. Hobie uses a pick up tube with a 90 degree angle pointed forward. Momentum pushes water up to the impeller, once primed should run the duration of the battery, obviously a timer switch would be a bad idea in this configuration..........or any configuration IMO __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode