The USPS Van Showed Up Today

[octico]

Originally Posted by jorluivil

Converting all of my battery connections to Delphi plugs.

I have been having connections issues between the battery and FF. If you don't sharing which ones did you order?

John

[YakDout]

Originally Posted by octico

I have been having connections issues between the battery and FF. If you don't sharing which ones did you order?



John

http://www.amazon.com/gp/aw/d/B004DV...5KL&ref=plSrch




And dont forget you will need some extras for your chargers.

[octico]

Originally Posted by YakDout

http://www.amazon.com/gp/aw/d/B004DV...5KL&ref=plSrch




And dont forget you will need some extras for your chargers.

Thanks!

[jorluivil]

here you go

http://www.performanceplusconnection.com/Item/WPK_2_22

[Starsky]

Love these connectors, just make sure to double check the polarity of the wires when you snap them in. It's probably a good idea to also invest in the removal tool if you are going to be doing a bunch of them. I use these on my FF and Livewell pump. I also put a drop of solder on my crimps to make sure I get a good connection.

[jorluivil]

Originally Posted by Starsky

Love these connectors, just make sure to double check the polarity of the wires when you snap them in. It's probably a good idea to also invest in the removal tool if you are going to be doing a bunch of them. I use these on my FF and Livewell pump. I also put a drop of solder on my crimps to make sure I get a good connection.

I don't have the crimping tool but I did solder all of my connections

[Starsky]

Originally Posted by jorluivil

I don't have the crimping tool but I did solder all of my connections

Yea the crimping tool is pretty expensive, but I ended up just getting the jaws (half the price) and using them with my crimp tool I got from Harbor Freight. I wanted to use a tool because I plan on using it often with a vehicle project.