Fishing setup? - Kayak Fishing Adventures on Big Water’s Edge

Ljs089 · 11-03-2014, 10:14 PM

Hello everyone, I'll be going out this veteran's day weekend with some veteran friends from school to hit up either Long beach, Huntington beach, or Seal beach. We haven't decided yet.

My main question is, what are some recommendations for a reel and rod that can handle white sea bass and yellow tail which are school sized or adult sized. I don't want to be unprepared just in case i hook up on a fully matured WSB, as they can get over 60+ lbs. I currently use a Daiwa vip 270 7ft rod rated 12-30 lbs, it doesn't even show the lure weight on the rod or on the website so that's confusing.

My reel is a Shimano 8000d baitrunner spooled with 50lb braid. I feel like my reel is pretty strong but my rod dips pretty hard when i put on a 6-8 inch mackerel. So i'm looking for a trolling/jigging rod and reel. I don't mind going conventional although i'm more familiar with spinning reels. Any advice on a good rod and reel combo for trolling/jigging for fish this size would be great.

P.S. I would love to learn specific model/color lures that may work great down here in SOCAL. I usually fish alone 99% of the time, so i learned everything about fishing through trial and error and Google. Like a leader for example, i don't know about you guys but I've tried tying a 40lb fluorocarbon to hooks and swivels... that knot will not cinch down because the line is too stiff and round in diameter.

easyday · 11-03-2014, 10:17 PM

Palomar knot?

octico · 11-03-2014, 10:29 PM

Quote:

Originally Posted by Ljs089

Hello everyone, I'll be going out this veteran's day weekend with some veteran friends from school to hit up either Long beach, Huntington beach, or Seal beach. We haven't decided yet.

My main question is, what are some recommendations for a reel and rod that can handle white sea bass and yellow tail which are school sized or adult sized. I don't want to be unprepared just in case i hook up on a fully matured WSB, as they can get over 60+ lbs. I currently use a Daiwa vip 270 7ft rod rated 12-30 lbs, it doesn't even show the lure weight on the rod or on the website so that's confusing.

My reel is a Shimano 8000d baitrunner spooled with 50lb braid. I feel like my reel is pretty strong but my rod dips pretty hard when i put on a 6-8 inch mackerel. So i'm looking for a trolling/jigging rod and reel. I don't mind going conventional although i'm more familiar with spinning reels. Any advice on a good rod and reel combo for trolling/jigging for fish this size would be great.

P.S. I would love to learn specific model/color lures that may work great down here in SOCAL. I usually fish alone 99% of the time, so i learned everything about fishing through trial and error and Google. Like a leader for example, i don't know about you guys but I've tried tying a 40lb fluorocarbon to hooks and swivels... that knot will not cinch down because the line is too stiff and round in diameter.

I think it may be tough to find WSB/YT in the locations you mentioned, but again I could be wrong. Why not head down to the Tidelands and join the other veterans for the HOW event on Saturday (I will be there ) . I know its a long drive I live in Orange ... not too far from you.

HOW

Ljs089 · 11-03-2014, 10:30 PM

I actually haven't tried a Palomar knot yet. I've only tied improved clinch knots, and snelling a hook with a uni knot connection. But it's hard to wrap the fluorocarbon line around the hook over and over because it's so stiff.

octico · 11-03-2014, 10:35 PM

Quote:

Originally Posted by Ljs089

I actually haven't tried a Palomar knot yet. I've only tied improved clinch knots, and snelling a hook with a uni knot connection. But it's hard to wrap the fluorocarbon line around the hook over and over because it's so stiff.

Palomar works best for me, just make sure you wet it. I never use anything over 30lb Fluorocarbon though ...

Ljs089 · 11-03-2014, 10:37 PM

I wish i could head over to meet the other Vets but one of the guys is driving his boat down from Sacramento, it would be too much travel for my friend. He's basically mothershipping me so we can go pretty far out 30+ miles. I just really need help with a setup before this weekend because not only do I not know a single thing about the questions i mentioned, but i also only have 1 rod and reel.

octico · 11-03-2014, 10:43 PM

I wish I could help but I will be down at HOW on Saturday.

alanw · 11-03-2014, 11:16 PM

Most guys here would steer you towards a conventional reel. I like Avets matched with a Calstar rod or maybe a Seeker rod because they are excellent quality and Made in USA. You also can't go wrong with a higher end Shimano or Daiwa or Penn setup. You can make almost any gear work but you might want to hit up a good local tackle shop for pro advice.

For knots I go with a palomar at the swivel or hook, a seguar at a mono/flouro connection, or a bimini/loop or whatever you prefer at braid/flouro connection. Check out the seguar knot guide https://seaguar.com/applications/knot-guide.html or http://www.netknots.com/. I use sequar 30lb flouro and it isn't stiff so I've not had problems with knots.

Ljs089 · 11-04-2014, 12:43 AM

Quote:

Originally Posted by alanw

Most guys here would steer you towards a conventional reel. I like Avets matched with a Calstar rod or maybe a Seeker rod because they are excellent quality and Made in USA. You also can't go wrong with a higher end Shimano or Daiwa or Penn setup. You can make almost any gear work but you might want to hit up a good local tackle shop for pro advice.

For knots I go with a palomar at the swivel or hook, a seguar at a mono/flouro connection, or a bimini/loop or whatever you prefer at braid/flouro connection. Check out the seguar knot guide https://seaguar.com/applications/knot-guide.html or http://www.netknots.com/. I use sequar 30lb flouro and it isn't stiff so I've not had problems with knots.

Thanks for all the helpful information alanw, just curious , what size reel and rod would you recommend? I never played with a conventional reel before. The star drag reels sounds like something i would like though.

addicted2sp33d · 11-04-2014, 07:53 AM

If you're going on a kayak, I would recommend switching to Conventional.

I normally use Spinning reels also, mainly because they never birdsnest when casting a lot; but I use Conventional when I'm on my kayak. When I'm cranking and pumping, I found that the Spinning bail kept hitting things like my legs, leashes, the hull, or what-not. After one trip with a Spinning, I got a conventional and never looked back. Your experiences may differ.

As for rod strength, it depends on how much you want to fight the fish. There are guys on this board who land big fish on skinny rods all the time. On the opposite end of the rod-strength spectrum, I've seen guys out there with tree trunk rods and roller tips... looks like they're going for Bluefin Tuna or something! I think your current rod will be fine. I look for a good fore-grip (grip ahead of the real seat) so that I can get some good leverage.

11-03-2014, 10:14 PM	#1
Ljs089 Junior Join Date: Oct 2014 Location: Anaheim Posts: 28	Fishing setup? Hello everyone, I'll be going out this veteran's day weekend with some veteran friends from school to hit up either Long beach, Huntington beach, or Seal beach. We haven't decided yet. My main question is, what are some recommendations for a reel and rod that can handle white sea bass and yellow tail which are school sized or adult sized. I don't want to be unprepared just in case i hook up on a fully matured WSB, as they can get over 60+ lbs. I currently use a Daiwa vip 270 7ft rod rated 12-30 lbs, it doesn't even show the lure weight on the rod or on the website so that's confusing. My reel is a Shimano 8000d baitrunner spooled with 50lb braid. I feel like my reel is pretty strong but my rod dips pretty hard when i put on a 6-8 inch mackerel. So i'm looking for a trolling/jigging rod and reel. I don't mind going conventional although i'm more familiar with spinning reels. Any advice on a good rod and reel combo for trolling/jigging for fish this size would be great. P.S. I would love to learn specific model/color lures that may work great down here in SOCAL. I usually fish alone 99% of the time, so i learned everything about fishing through trial and error and Google. Like a leader for example, i don't know about you guys but I've tried tying a 40lb fluorocarbon to hooks and swivels... that knot will not cinch down because the line is too stiff and round in diameter.

11-03-2014, 10:17 PM	#2
easyday Senior Member Join Date: Apr 2013 Location: Oceanside Posts: 1,470	Palomar knot? __________________

11-03-2014, 11:16 PM	#8
alanw Made in U.S.A. Join Date: Oct 2012 Location: Dana Point Posts: 1,625	Most guys here would steer you towards a conventional reel. I like Avets matched with a Calstar rod or maybe a Seeker rod because they are excellent quality and Made in USA. You also can't go wrong with a higher end Shimano or Daiwa or Penn setup. You can make almost any gear work but you might want to hit up a good local tackle shop for pro advice. For knots I go with a palomar at the swivel or hook, a seguar at a mono/flouro connection, or a bimini/loop or whatever you prefer at braid/flouro connection. Check out the seguar knot guide https://seaguar.com/applications/knot-guide.html or http://www.netknots.com/. I use sequar 30lb flouro and it isn't stiff so I've not had problems with knots. __________________ Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Its not a spelling B its a fishing B ~yakjoe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-03-2014, 10:30 PM	#4
Ljs089 Junior Join Date: Oct 2014 Location: Anaheim Posts: 28	I actually haven't tried a Palomar knot yet. I've only tied improved clinch knots, and snelling a hook with a uni knot connection. But it's hard to wrap the fluorocarbon line around the hook over and over because it's so stiff.

11-03-2014, 10:37 PM	#6
Ljs089 Junior Join Date: Oct 2014 Location: Anaheim Posts: 28	I wish i could head over to meet the other Vets but one of the guys is driving his boat down from Sacramento, it would be too much travel for my friend. He's basically mothershipping me so we can go pretty far out 30+ miles. I just really need help with a setup before this weekend because not only do I not know a single thing about the questions i mentioned, but i also only have 1 rod and reel.

11-03-2014, 10:43 PM	#7
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	I wish I could help but I will be down at HOW on Saturday.

11-04-2014, 07:53 AM	#10
addicted2sp33d Here fishy fishy fishy... Join Date: May 2011 Location: San Diego, CA Posts: 774	If you're going on a kayak, I would recommend switching to Conventional. I normally use Spinning reels also, mainly because they never birdsnest when casting a lot; but I use Conventional when I'm on my kayak. When I'm cranking and pumping, I found that the Spinning bail kept hitting things like my legs, leashes, the hull, or what-not. After one trip with a Spinning, I got a conventional and never looked back. Your experiences may differ. As for rod strength, it depends on how much you want to fight the fish. There are guys on this board who land big fish on skinny rods all the time. On the opposite end of the rod-strength spectrum, I've seen guys out there with tree trunk rods and roller tips... looks like they're going for Bluefin Tuna or something! I think your current rod will be fine. I look for a good fore-grip (grip ahead of the real seat) so that I can get some good leverage.