|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
04-02-2014, 01:35 AM | #1 |
Senior Member
Join Date: Jun 2013
Posts: 273
|
Changing out hooks on irons
|
04-02-2014, 02:58 PM | #2 |
Team Keine Zugehörigkeit
Join Date: Nov 2010
Location: Way out there
Posts: 2,854
|
search threads for "brazing rings" Wade posted up some good info on it.
here I got a little free time lots of good info below http://www.bigwatersedge.com/bwevb/s...hlight=brazing http://www.bigwatersedge.com/bwevb/s...hlight=brazing heres the search http://www.bigwatersedge.com/bwevb/s...archid=1455080
__________________
Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ |
04-02-2014, 05:22 PM | #3 |
Senior Member
Join Date: Mar 2005
Location: san diego
Posts: 158
|
The easiest way is to buy the same size treble with the cut eye. Use a couple of pairs of pliers and open the eye by bending it sideways just far enough to make the opening fit over the ring then bend it back. Very strong, the hook will straighten out before the eye will open. Dont cut the ring and replace it with a split-ring.
|
04-02-2014, 08:40 PM | #4 |
Senior Member
Join Date: Mar 2005
Location: Richland Oregon
Posts: 1,547
|
Squidco can do it right for a minimal charge.
|
Thread Tools | |
Display Modes | |
|
|