What Do You Think? - Kayak Fishing Adventures on Big Water’s Edge

Fishin Phil · 03-16-2014, 10:32 AM

You do a morning session out of La Jolla and the launch is easy with manageable waves. Then it is time for you to re-enter the waves to land.

1. How do you protect your fish finder on a re-entry? You could re-enter many times and stay upright but what about that one time you flip the yak? Dunking your fish finder in salt water just doesn't sound like a good idea since they can cost $$. What do you do to protect your fish finder? What do you think?

2. The Hobie bait tank battery compartment seems to be just a lid that is held on with a bungie cord. It definitely does not look waterproof or secure if you do capsize. Do those of you that have a hobie bait tank remove the battery prior to re-entry? What do you think?

Thanks.

bosshoss · 03-16-2014, 10:59 AM

Good Q's..............

ctfphoto · 03-16-2014, 11:09 AM

I go thru the surf once a week on average throughout the year.

My one year old fish finder (bought brand new) doesn't work anymore.

I am 100% certain it has to do with salt water ....

battleborn · 03-16-2014, 11:19 AM

when in doubt bag it up….Ofcourse I'm talking about the fish finder. Any thing I am wanting to keep dry on the yak especially when coming in thru the waves I will put into a dry bag while on calmer water.

http://www.backcountry.com/sealline-...FcURMwodemMALA

you may be able to find it cheaper. Just the first one to pop up on google.

Zfish03 · 03-16-2014, 11:29 AM

Quote:

Originally Posted by battleborn

when in doubt bag it up….Ofcourse I'm talking about the fish finder. Any thing I am wanting to keep dry on the yak especially when coming in thru the waves I will put into a dry bag while on calmer water.

http://www.backcountry.com/sealline-...FcURMwodemMALA

you may be able to find it cheaper. Just the first one to pop up on google.

X2 bag it and secure it on entry and return. Give it a good fresh water wipe down when you get home. Put some dielectric gel and corrosion protectant on it. I've lost one because I didn't do this (it caught on fire at the launch, literally). Fortunately I had insurance on it.

WildernessWanker · 03-16-2014, 12:53 PM

I have a rubber cap I put over the connection to the FF, found it at Wal-Mart and it's for something else. I'll see if I can find the package to show it off. I disconnect the FF before launch and landing and stow it in my center hatch, in a bag of course. As soon as I'm loaded on the truck I remove my little cap and spray the connection with electrical contact cleaner and reapply dielectric grease, save with the FF. Been going strong for over a year now with no signs of corrosion. I am super good about taking care of it, especially since it was more expensive than the yak I put it on.

Sent from my SPH-L520 using Tapatalk

lowprofile · 03-16-2014, 01:19 PM

Quote:

Originally Posted by Zfish03

X2 bag it and secure it on entry and return. Give it a good fresh water wipe down when you get home. Put some dielectric gel and corrosion protectant on it. I've lost one because I didn't do this (it caught on fire at the launch, literally). Fortunately I had insurance on it.

Your fish finder caught on fire!?!?

knowing you, you weren't even mad about it.

Dail14 · 03-16-2014, 02:55 PM

I once wiped out in La Jolla and my fish finder has not shown any adverse effects even though it spent a bit of time completely submerged

. However it is a basic fishfinder with less ports delicate equipment than many people use. Its a piranhamax 150. You could always disconnect it from the power and transducer and store it below deck if your yak has a front hatch (most malibus). If you leave it connected make sure the power and transducer ports are as plugged in as possible to prevent water from leaking in there.

Raskal311 · 03-16-2014, 03:08 PM

Anything I can't afford to get wet (extensive reels and fish finder) goes in zip lock bags and dry bag prior to re entry. May as well since I would have to put them away on the beach anyway.

T-Rex · 03-16-2014, 04:05 PM

Quote:

Originally Posted by Zfish03

X2 bag it and secure it on entry and return. Give it a good fresh water wipe down when you get home. Put some dielectric gel and corrosion protectant on it. I've lost one because I didn't do this (it caught on fire at the launch, literally). Fortunately I had insurance on it.

x2. Use dielectric grease and rinse with fresh water when you get home. I've never had to use my insurance from West Marine, but it does give some peace of mind!

alanw · 03-16-2014, 09:16 PM

FFs are waterproof. If it fails due to submersion then just get a new one under warranty. Mine gets soaked and sprayed every time it goes out. It gets hosed down every time it comes back. It still works fine after 1.5 years. Dielectric grease on the connection is the only special treatment it gets.

FISH11 · 03-16-2014, 09:36 PM

Keeping die electric grease on both the fish finder terminals and the harness plug terminal helps prevent corrosion. Provably just as important is to disconnect the battery terminals before disconnecting the Fish finder that will prevent electrolysis because there won't be any electrical current in the wiring. I go trough and back again in the surf at LJ and have not had any problems following that rule.

03-16-2014, 10:32 AM	#1
Fishin Phil Senior Member Join Date: Dec 2005 Location: San Diego Posts: 288	What Do You Think? You do a morning session out of La Jolla and the launch is easy with manageable waves. Then it is time for you to re-enter the waves to land. 1. How do you protect your fish finder on a re-entry? You could re-enter many times and stay upright but what about that one time you flip the yak? Dunking your fish finder in salt water just doesn't sound like a good idea since they can cost $$. What do you do to protect your fish finder? What do you think? 2. The Hobie bait tank battery compartment seems to be just a lid that is held on with a bungie cord. It definitely does not look waterproof or secure if you do capsize. Do those of you that have a hobie bait tank remove the battery prior to re-entry? What do you think? Thanks. __________________ God, Family, Your Health, You're Fishing.

03-16-2014, 03:08 PM	#9
Raskal311 Senior Member Join Date: Mar 2011 Location: Santa Ana/Westminster Posts: 1,256	Anything I can't afford to get wet (extensive reels and fish finder) goes in zip lock bags and dry bag prior to re entry. May as well since I would have to put them away on the beach anyway. __________________ Kevin Yellow PA12

03-16-2014, 09:16 PM	#11
alanw Made in U.S.A. Join Date: Oct 2012 Location: Dana Point Posts: 1,625	FFs are waterproof. If it fails due to submersion then just get a new one under warranty. Mine gets soaked and sprayed every time it goes out. It gets hosed down every time it comes back. It still works fine after 1.5 years. Dielectric grease on the connection is the only special treatment it gets. __________________ Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Its not a spelling B its a fishing B ~yakjoe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-16-2014, 10:59 AM	#2
bosshoss Senior Member Join Date: Mar 2012 Location: Santee Posts: 197	Good Q's..............

03-16-2014, 11:09 AM	#3
ctfphoto Senior Member Join Date: Sep 2011 Location: San Diego Posts: 901	I go thru the surf once a week on average throughout the year. My one year old fish finder (bought brand new) doesn't work anymore. I am 100% certain it has to do with salt water ....

03-16-2014, 11:19 AM	#4
battleborn Senior Member Join Date: Oct 2011 Posts: 221	when in doubt bag it up….Ofcourse I'm talking about the fish finder. Any thing I am wanting to keep dry on the yak especially when coming in thru the waves I will put into a dry bag while on calmer water. http://www.backcountry.com/sealline-...FcURMwodemMALA you may be able to find it cheaper. Just the first one to pop up on google.

03-16-2014, 12:53 PM	#6
WildernessWanker WildernessWanker Join Date: Mar 2013 Location: Lancaster, CA Posts: 345	I have a rubber cap I put over the connection to the FF, found it at Wal-Mart and it's for something else. I'll see if I can find the package to show it off. I disconnect the FF before launch and landing and stow it in my center hatch, in a bag of course. As soon as I'm loaded on the truck I remove my little cap and spray the connection with electrical contact cleaner and reapply dielectric grease, save with the FF. Been going strong for over a year now with no signs of corrosion. I am super good about taking care of it, especially since it was more expensive than the yak I put it on. Sent from my SPH-L520 using Tapatalk

03-16-2014, 02:55 PM	#8
Dail14 Senior Member Join Date: Oct 2012 Posts: 123	I once wiped out in La Jolla and my fish finder has not shown any adverse effects even though it spent a bit of time completely submerged . However it is a basic fishfinder with less ports delicate equipment than many people use. Its a piranhamax 150. You could always disconnect it from the power and transducer and store it below deck if your yak has a front hatch (most malibus). If you leave it connected make sure the power and transducer ports are as plugged in as possible to prevent water from leaking in there.

03-16-2014, 09:36 PM	#12
FISH11 Member Join Date: Aug 2013 Location: Pine Valley when not fishing La Jolla Posts: 2,643	Keeping die electric grease on both the fish finder terminals and the harness plug terminal helps prevent corrosion. Provably just as important is to disconnect the battery terminals before disconnecting the Fish finder that will prevent electrolysis because there won't be any electrical current in the wiring. I go trough and back again in the surf at LJ and have not had any problems following that rule.