Wanting to get into this! - Kayak Fishing Adventures on Big Water’s Edge

Bert Vega · 01-09-2014, 08:16 AM

That stand will work perfect. Especially with putting wheels on it. Salty pirate can you post a pic of yours? With the wheel attachment. And thank you for the advise Kobra. Point well taken. I know I want FF as close to me as possible. Going to put it on ram ball so I can push it down if I need too. I see allot of people mounting it on the sail mast. I like it there out of the way. Just concerned on how far away that is. And being able to read the screen. Don't have the best eye site either. As far as parts I am putting on. Installing 2 rocket launchers at the front,Trolly line, rear rod extenders, and FF stuff when that gets in.

ful-rac · 01-09-2014, 08:41 AM

I have mine attached to the yak attack gear track works very well, and it is in reach. You should consider mounting on the gear track.

The plus with the gear track is that you can mount your accessories to them cleanly, and remove them and switch them depending upon what kind of fishing you are doing at the time.

Bert Vega · 01-09-2014, 08:50 AM

Thank you. That is a great idea and a sweet picture.

WildernessWanker · 01-09-2014, 11:37 AM

So is the pic really to show the FF, or just another reminder of how the Team Sewer boys play?! Either way pretty awesome.

StinkyMatt · 01-09-2014, 03:42 PM

Tony has no shame!

Nice little stocker trout!

ful-rac · 01-09-2014, 03:50 PM

Quote:

Originally Posted by StinkyMatt

Tony has no shame!

Nice little stocker trout!

Yep gottem on my downrigger. That's how we roll at Irvine lake!

Lipripper92592 · 01-09-2014, 04:55 PM

I have two strips of angle iron bolted to the ceiling trusses in my garage. Holes drilled, hooks or loops, for tie down straps. The first few times I had a flat head lifting that PA, but it's pretty simple, slip the nose in the first loop, then tail in the second loop. Tighten the front a bit, then the back, switching back and forth until it is flat against the ceiling.

01-09-2014, 08:41 AM	#2
ful-rac Emperor Join Date: May 2009 Location: Buena Park Posts: 3,649	I have mine attached to the yak attack gear track works very well, and it is in reach. You should consider mounting on the gear track. The plus with the gear track is that you can mount your accessories to them cleanly, and remove them and switch them depending upon what kind of fishing you are doing at the time. __________________ There's nothing colder than yesterday's hotdog.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-09-2014, 08:16 AM	#1
Bert Vega Tail Chaser! Join Date: Dec 2013 Location: Murrieta Posts: 627	That stand will work perfect. Especially with putting wheels on it. Salty pirate can you post a pic of yours? With the wheel attachment. And thank you for the advise Kobra. Point well taken. I know I want FF as close to me as possible. Going to put it on ram ball so I can push it down if I need too. I see allot of people mounting it on the sail mast. I like it there out of the way. Just concerned on how far away that is. And being able to read the screen. Don't have the best eye site either. As far as parts I am putting on. Installing 2 rocket launchers at the front,Trolly line, rear rod extenders, and FF stuff when that gets in.

01-09-2014, 08:50 AM	#3
Bert Vega Tail Chaser! Join Date: Dec 2013 Location: Murrieta Posts: 627	Thank you. That is a great idea and a sweet picture.

01-09-2014, 11:37 AM	#4
WildernessWanker WildernessWanker Join Date: Mar 2013 Location: Lancaster, CA Posts: 345	So is the pic really to show the FF, or just another reminder of how the Team Sewer boys play?! Either way pretty awesome.

01-09-2014, 03:42 PM	#5
StinkyMatt Senior Member Join Date: Jun 2010 Location: Under a bridge Posts: 2,169	Tony has no shame! Nice little stocker trout!