![]() |
|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: May 2013
Location: San Diego - North County
Posts: 82
|
Lowrance FF problem - plug disintegrated
Two questions for the community: First, how do I fix this? the head unit is fine and I don't want to shell out for a new one. Replace the transducer or solder on a new plug? Second, anybody had this before and what do you do to protect this weak link in the electronics chain? |
![]() |
![]() |
![]() |
#2 | |
Brandon
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
|
Quote:
|
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: May 2012
Location: The Matrix
Posts: 643
|
I smother all my connections in dielectric grease. My kayak is stored outside, too. (in the shade, on saw horses, under a tarp) Dielectric grease can be found at any hardware store. I think Andy carries it in SSB, I would image they do down south too. WD-40 works well, but can aide in the rusting process if you leave too much on there.
If you are good with a soldering iron, I say fix the plug and move on. No need to buy a whole new ducer or head unit if you can buy a plug and fix the issue yourself! Get her fixed, and back out there! ![]() Edit- Or take a free ducer from YakDout. Nice. ^^^^
__________________
-Kevin |
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: Dec 2012
Posts: 516
|
Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Emperor
Join Date: May 2009
Location: Buena Park
Posts: 3,649
|
Try this:
Always connect your fishfinder first, then connect the battery. When removing, disconnect your battery then your fishfinder. Use dielectric grease on all connections, rinse with freshwater asap. You never want power going to a open plug, that just opens it up for immediate electrolysis. If you follow these steps you will mitigate your corrosion problem.
__________________
There's nothing colder than yesterday's hotdog. |
![]() |
![]() |
![]() |
#6 |
Made in U.S.A.
Join Date: Oct 2012
Location: Dana Point
Posts: 1,625
|
+1 on the dielectric grease
Use WD-40 only to displace any water that may have gotten in the connection. WD-40 is NOT good for corrosion protection.
__________________
Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º> Its not a spelling B its a fishing B ![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Aug 2012
Posts: 1,823
|
![]()
__________________
"Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson |
![]() |
![]() |
![]() |
#8 | |
Baitless on Baja
Join Date: May 2013
Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay
Posts: 4,250
|
Quote:
__________________
http://www.mako-ville.com Home 760-630-4470 Cell 760-520-2514 YES YOU CAN |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jan 2012
Posts: 2,526
|
it is not recommended
to cut the cable . i read that in the hummingbird manual . each manufacturer might be different . our yaks are not 20 ' long , so i would like to take a good 6 ' off , but i would be willing to bet that cutting is not advised due to insulation purposes . i would say buy a new transducer .
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Oct 2007
Location: Riverside
Posts: 108
|
Call Lowrance, their customer service surprised me.
|
![]() |
![]() |
![]() |
#11 |
Member
Join Date: May 2013
Location: San Diego - North County
Posts: 82
|
Thanks much for all the advice.
Ful-rac - that makes good sense! I would not have thought of that and ive been doing it wrong. Alanw - dielectric grease it shall be! I called Lowrance and they suggested buying an extension cable ($22.95) and splicing it in. A new transducer costs $55 as a plan B. Just glad i dont have to shell out for a whole new Ff. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|