![]() |
|
![]() |
#1 |
Crusty Member
|
I have one and used it a couple times in the bay...or at humphrey's but never even take it to LJ.
![]()
__________________
pastor maximus felis domestica Bobby ![]() |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Feb 2007
Posts: 138
|
Out here I recommend a bungee cord to tie off to kelp with. If wind picks up and you want to remain stationary-- that is your best bet. The bungee acts as a shock absorber on the swells so you don't get sudden movements from the yak. Also-- you can get a drift chute to slow down drifts on windier days as well. Leave the anchor at home unless you are lake fishing.
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Mar 2006
Location: La Jolla Shores
Posts: 1,626
|
kayaks are unstable, very submersible, and have no beam ,therefore, a swell or white cap pushes the kayak one way while your at anchor, and the kayak is positioned in an opposing direction, perhaps by shifting winds, the two opposing forces can cause capsize no matter how much scope you have out.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2005
Posts: 1,906
|
I guess I'll have to add the "anchor of death" to the "waders of death" on the list of things I'm doing wrong.
![]()
__________________
![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
Yawn
Join Date: Aug 2007
Location: San Diego
Posts: 2
|
you should go out in your waders, anchor up in LJ and fire up the grill. lol lol I would have no problem taking the advice from Brad. IMO he seems to have a prettty good idea of what he is doing on a yak.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Mar 2005
Posts: 2,568
|
I think all points made are very valid ones.
On my boat, I always make sure I have an anchor with 200 yards of rope on board. I think of that anchor as a very important safety item. If the engine dies, I want to make sure I can anchor up ‘till VA arrives. I primarily fish inshore with my skiff. For some reason, I don’t have an anchor on my kayak. ![]() I remember reading that the anchor rope ought to be at least 3 times the depth – the idea is more horizontal the angle, the better. Here’s some handy general info on anchoring. It is specific to boats so I’m sure all these figures are considerably different for kayaks as they are so light… That's how I understood Dave's points, and I agree with him: http://www.boatus.com/boattech/anchorin.htm
__________________
![]() <)))< ....b-a-a-a-a |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|