Drilling into kayaks? - Kayak Fishing Adventures on Big Water’s Edge

addicted2sp33d · 05-17-2013, 10:27 AM

When Chuck Norris needs to cut a hole, he stares at a spot, and the hole simply appears out of fear of getting punched by Chuck Norris.

vincentek9 · 05-17-2013, 10:50 AM

anything that can drill a hole the size that you want it is something that would work. i use all types of drill bits and reamers. i also purchase rubber stoppers from lowes or home depot to plug up some of the larger holes that i drill (transducer + power cable for FF). just make sure to measure it out as much as possible to avoid drilling an unwanted hole.

05-17-2013, 10:50 AM	#2
vincentek9 MAYNEE-YAK Join Date: Feb 2012 Location: So Cal Posts: 533	anything that can drill a hole the size that you want it is something that would work. i use all types of drill bits and reamers. i also purchase rubber stoppers from lowes or home depot to plug up some of the larger holes that i drill (transducer + power cable for FF). just make sure to measure it out as much as possible to avoid drilling an unwanted hole. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-17-2013, 10:27 AM	#1
addicted2sp33d Here fishy fishy fishy... Join Date: May 2011 Location: San Diego, CA Posts: 774	When Chuck Norris needs to cut a hole, he stares at a spot, and the hole simply appears out of fear of getting punched by Chuck Norris.