How to attach a leash to a rod? - Kayak Fishing Adventures on Big Water’s Edge

dmrides · 03-25-2013, 06:20 PM

To further secure the loop in the turks head you can sew in a piece of thin line (like the line used for whip finishing dock lines) through the rope where the loop goes in and out. If that makes sense. It will never come apart.

skrilla · 03-25-2013, 07:18 PM

Here's a turkshead with leash loop I did for my light pole awhile back. I just tied the ends together after tightening it down. A few drops of superglue and a coat of spar urethane seals it all up. Has held up great since.

03-25-2013, 07:18 PM	#2
skrilla Senior Member Join Date: Jun 2011 Location: San Diego Posts: 664	Here's a turkshead with leash loop I did for my light pole awhile back. I just tied the ends together after tightening it down. A few drops of superglue and a coat of spar urethane seals it all up. Has held up great since. __________________ Urban Camo Trident 13

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-25-2013, 06:20 PM	#1
dmrides Senior Member Join Date: Aug 2009 Location: Point Loma Posts: 584	To further secure the loop in the turks head you can sew in a piece of thin line (like the line used for whip finishing dock lines) through the rope where the loop goes in and out. If that makes sense. It will never come apart.