Storing your Pro Angler - Kayak Fishing Adventures on Big Water’s Edge

Fish4Fun · 08-21-2012, 08:40 PM

How are you guys storing your Pro Angler at home?

Sitting on the floor, cradles?

Read a forum in Texas where people were putting the PA on top of 3.5" PVC pipes, along the line of scupper holes. Is this OK?

seriola_killer · 08-21-2012, 10:07 PM

Mine sits on a carpeted piece of 4 x 6 plywood. Got a small amount of foam underneath the carpet. Seems to be just fine.

blitzburgh · 08-22-2012, 08:37 AM

If you have the room, I believe Hobie recommends standing it up. I store mine flipped over, on padded sawhorses. If outside, cover it.

ChefT · 08-22-2012, 01:10 PM

I have a buddie that is welding me up a custom cart with casters on it to the height of the bed of my truck. should be done soon. ill post a pic to show when Finnish

Fish4Fun · 08-22-2012, 03:57 PM

thanks for the posts.

i sit my on top of a converted PWC trailer...with the bunks turned 90 degrees i.e. like roof racks on top of our cars/suv.

I am trying out the 3" PVC piples between the bunks and the yak. I am using the softer pipes, the type used for draining water from the garden. Just looking at it, there appears to be more give/flex on the pipes so they hug the Yak contour better for more even weight distribution.

I am thinking whether to make this a permanent part of my trailer setup or just add the pipes for storage only.

08-21-2012, 08:40 PM	#1
Fish4Fun Member Join Date: Nov 2009 Posts: 40	Storing your Pro Angler How are you guys storing your Pro Angler at home? Sitting on the floor, cradles? Read a forum in Texas where people were putting the PA on top of 3.5" PVC pipes, along the line of scupper holes. Is this OK?

08-21-2012, 10:07 PM	#2
seriola_killer Sled Peddler Join Date: Feb 2012 Location: Bonita, Ca. Posts: 236	Mine sits on a carpeted piece of 4 x 6 plywood. Got a small amount of foam underneath the carpet. Seems to be just fine. __________________ Jerry Moore Need a car or truck to yaul your yak? Ring me up. (619)988-3325

08-22-2012, 08:37 AM	#3
blitzburgh Senior Member Join Date: Mar 2009 Location: Menifee Posts: 2,509	If you have the room, I believe Hobie recommends standing it up. I store mine flipped over, on padded sawhorses. If outside, cover it. __________________ ”The beauty of the Second Amendment is that it will not be needed until they try to take it.” ~Thomas Jefferson.........maybe

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-22-2012, 01:10 PM	#4
ChefT Senior Member Join Date: May 2011 Location: SD Posts: 216	I have a buddie that is welding me up a custom cart with casters on it to the height of the bed of my truck. should be done soon. ill post a pic to show when Finnish

08-22-2012, 03:57 PM	#5
Fish4Fun Member Join Date: Nov 2009 Posts: 40	thanks for the posts. i sit my on top of a converted PWC trailer...with the bunks turned 90 degrees i.e. like roof racks on top of our cars/suv. I am trying out the 3" PVC piples between the bunks and the yak. I am using the softer pipes, the type used for draining water from the garden. Just looking at it, there appears to be more give/flex on the pipes so they hug the Yak contour better for more even weight distribution. I am thinking whether to make this a permanent part of my trailer setup or just add the pipes for storage only.