Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-16-2007, 09:10 AM   #3
zeelaagee
Member
 
Join Date: Jul 2006
Location: Carlsbad
Posts: 37
Send a message via AIM to zeelaagee
i made my own... it's easy

i picked up a older jogging stroller from CL for 15 bucks. it was one of the older versions with 20" tires and a lot of metal tubing and brackets to work with. it's not the prettiest cart on the beach- but it works at less than a third the cost.

a hacksaw/sawsall, drill gun, rivet gun, ballpine (sp?) hammer, a couple of hours and motivation was all it took to convert it into a very useful addition to the arsenal. i think i'll lower the rails a bit so that the center of gravity of the kayak sits lower for travelling over more severe obstacles. i use a ratchet strap to secure the boat to it.

here's a photo of the side:




i flattened out some tubing and attached it for supports to eliminate lateral sway.







it was nice to have some of the brackets already in place to use.


zeelaagee is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:53 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.