|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Community | Calendar | Today's Posts | Search |
|
Thread Tools | Display Modes |
02-21-2010, 04:56 PM | #1 |
Member
Join Date: Dec 2009
Location: San Diego
Posts: 89
|
Penn 500 Conversion
I want to convert my Penn 500 to a 501. I was inspired this auction on eBay http://bit.ly/9mXFyb (hope the link still works). What I want to know is, where, locally, can I get the parts to do this? I figure the conversion will cost me more than buying a new/better reel but I want to do it for the learning experience as well as a little project to get familiar with these do-it-yourself types of reels.
Also, I recently got into the sport and bought a Sealine-X 50SHA and after reading some posts it seems that I should have gone with 40 and the lower gear ratio. As it turns out, my return period on the reel is up and I want to know if there are any concerns before I take this out, that way I can sell it and get the 40 everyone is raving about. Probably should be two threads, I know. If the above link doesn't work here are the specs - Penn Jigmaster 500 converted to 501 (narrow) size with Tiburon frame -Tiburon Lite handle -Newell 5:1 stainless gears -Newell drag improvement kit -Newell LC-1 long cast bearings -Aluminum clamp
__________________
<' )))><es |
|
|