Reversing default height vantage ct seat. - Kayak Fishing Adventures on Big Water’s Edge

YakDout · 10-29-2015, 10:47 AM

While I can't take credit for this, it was a good
Modification for me. I hate leaning forward and the seat position lowering to the hull. When I did the mod I noticed the spring wasn't tight enough. I ended up putting a small screwdriver in the spring and twisting it a good turn or two in the right direction to tighten it up. Works great now.

http://www.seqic.com.au/hobie-advent...tage-seat-mod/

10-29-2015, 10:47 AM	#1
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	Reversing default height vantage ct seat. While I can't take credit for this, it was a good Modification for me. I hate leaning forward and the seat position lowering to the hull. When I did the mod I noticed the spring wasn't tight enough. I ended up putting a small screwdriver in the spring and twisting it a good turn or two in the right direction to tighten it up. Works great now. http://www.seqic.com.au/hobie-advent...tage-seat-mod/ Last edited by YakDout; 10-29-2015 at 11:09 AM.