Rigging the Yaks! - Kayak Fishing Adventures on Big Water’s Edge

Subarualmen · 12-16-2014, 09:50 AM

Hey All

Thanks for the feedback.

I did place a decently sized order yesterday. I am going to install a system for an Anchor, but it will be a "Drill Free" anchor. It will connect to each of the handles with Carribeaners on each side. Connected to those carribeaners will be a Pulley. Pulleys will connect in the middle with a 3" Stainless Steel loop.

I will be doing some lake fishing as well.

I do have a nice drift sock. It's 14" and only cost around 9 dollars.

I'll post a list to what i purchased when i get home tonight. A bunch of repair parts, bungees, VHF Radio, ect.

I also built a nice Kayak holder out of PVC. It ran me right around $100 of materials. It will hold both Kayaks quite nicely. Installed some shorter PVC pipes on it for rod storage!

12-16-2014, 09:50 AM	#8
Subarualmen Member Join Date: Dec 2014 Posts: 91	Hey All Thanks for the feedback. I did place a decently sized order yesterday. I am going to install a system for an Anchor, but it will be a "Drill Free" anchor. It will connect to each of the handles with Carribeaners on each side. Connected to those carribeaners will be a Pulley. Pulleys will connect in the middle with a 3" Stainless Steel loop. I will be doing some lake fishing as well. I do have a nice drift sock. It's 14" and only cost around 9 dollars. I'll post a list to what i purchased when i get home tonight. A bunch of repair parts, bungees, VHF Radio, ect. I also built a nice Kayak holder out of PVC. It ran me right around $100 of materials. It will hold both Kayaks quite nicely. Installed some shorter PVC pipes on it for rod storage!