2015 Outback rectangular hatch option - Kayak Fishing Adventures on Big Water’s Edge

makobob · 10-03-2014, 11:01 AM

The insert that comes with the rectangular hatch is weldable and Hobie makes a welding kit for around $60. Most elect soldering irons will also work. Get a 3-5 gallon plastic bucket to pratcise on it is simple. Cut the inert 1/2 way up, cut a ring 1/2-3/4 inch wide, put the two halves together, use ring as weld filler material. Should be strong and water tight. Can be welded from both sides.

TIP: Lightly duct tape inside, then tack in a couple places outside before removing tape and filling whole weld. Take your time, get a good fill and it will last forever.

10-03-2014, 11:01 AM	#14
makobob Baitless on Baja Join Date: May 2013 Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay Posts: 4,250	The insert that comes with the rectangular hatch is weldable and Hobie makes a welding kit for around $60. Most elect soldering irons will also work. Get a 3-5 gallon plastic bucket to pratcise on it is simple. Cut the inert 1/2 way up, cut a ring 1/2-3/4 inch wide, put the two halves together, use ring as weld filler material. Should be strong and water tight. Can be welded from both sides. TIP: Lightly duct tape inside, then tack in a couple places outside before removing tape and filling whole weld. Take your time, get a good fill and it will last forever. __________________ http://www.mako-ville.com Home 760-630-4470 Cell 760-520-2514 YES YOU CAN