Through the hull wet mount vs glue/goop mount

[Jimmyz123]

Originally Posted by spudz

Going to install a fish finder this weekend. Will be a through the hull transducer installation. Debating between a wet mount vs the glue/goop mount. Pros/cons between the two? Any advice would be appreciated

Thanks!

Unless you are using the portable arm over the side installation, using the Electrical Putty install to me is better and less permanent. You can move the ducer when ever you want, and you'll get great results. Nothing beats getting the Transducer into the water, but the next best thing would be the putty installation. No need for making any brackets or anything, once you press the ducer down onto the putty, that thing will not move, even if you drop your Kayak off the top of an SUV 2 times like I did.