building my very first bait tank need help

tehburninator building my very first bait... 09-25-2012, 08:46 AM

Badtaste2k I picked up a 6v 7.6a at Frys... 09-25-2012, 08:58 AM

tehburninator thanks dan, i'll throw some... 09-25-2012, 09:06 AM

MrM What yak do you have? It... 09-25-2012, 09:14 AM

tehburninator ok, i might make a run home... 09-25-2012, 09:19 AM

Badtaste2k Until that one stubborn... 09-25-2012, 09:41 AM

min-va You can get a 6v 12ah battery... 09-25-2012, 10:14 AM

tehburninator i dont know why, but ever... 09-25-2012, 10:20 AM

min-va Ah* = "amp hour", for example... 09-25-2012, 10:45 AM

Siebler I think you may want to up... 09-25-2012, 11:16 AM

tehburninator thanks for the advice ^^^ was... 09-25-2012, 12:21 PM

tehburninator heres a few more 09-25-2012, 12:32 PM

grey zone You should do fine with that... 09-25-2012, 01:05 PM

tehburninator weigh the stern when coming... 09-25-2012, 02:07 PM

GregAndrew If you are going to have your... 09-25-2012, 02:11 PM

tehburninator ok doke. so far ive been... 09-25-2012, 02:18 PM

ful-rac Hey don't forget to put one... 09-25-2012, 03:04 PM

jorluivil I would stay away from those... 09-25-2012, 04:03 PM

ful-rac Agree, those crimps are going... 09-25-2012, 04:12 PM

GregAndrew Home Depot usually carries... 09-25-2012, 04:26 PM

theluckypig i used a tank that size with... 09-25-2012, 04:41 PM

NextBite Anyone wanna make a homemade... 09-25-2012, 05:27 PM

tehburninator Why do you think the whole... 09-25-2012, 05:45 PM

theluckypig i think i had too many... 09-25-2012, 07:48 PM

tehburninator Well I'll know within the... 09-25-2012, 09:00 PM

GregAndrew You should point the 90 deg.... 09-25-2012, 09:06 PM

jorluivil I just flushed my toilet 54... 09-26-2012, 08:39 AM

tehburninator There are holes in the crate... 09-25-2012, 05:40 PM

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Forum Rules

Forum Jump

All times are GMT -8. The time now is 08:40 PM.

09-25-2012, 04:26 PM	#20
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	Home Depot usually carries the PVC type of one-way valve. Or you can use a gas line squeeze ball that most Marine stores carry. With your inlet so low, how are you going to plumb your pump to the tank?