Hoopin & Fishing - Kayak Fishing Adventures on Big Water’s Edge

Regor · 01-26-2011, 07:49 AM

Thanks Brian for the nets and Jim for the advice.

I only took a few nets out, and all PVC is pressed together without glue to allow for modifications. I already noticed that I will be lowering the PVC to rest on the yak to add some stability. Thinking some of the felt pads from Home depot will save the yak from the rubbing.

I also noticed that it does not take a lot for the yak to be off-kiltered when you add up the weight of the nets, so centering of the rack/nets is important

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-26-2011, 07:49 AM	#4
Regor Greg Join Date: May 2010 Location: Chula Vista, ca Posts: 509	Thanks Brian for the nets and Jim for the advice. I only took a few nets out, and all PVC is pressed together without glue to allow for modifications. I already noticed that I will be lowering the PVC to rest on the yak to add some stability. Thinking some of the felt pads from Home depot will save the yak from the rubbing. I also noticed that it does not take a lot for the yak to be off-kiltered when you add up the weight of the nets, so centering of the rack/nets is important