Need an 08 Mirage Drive - Kayak Fishing Adventures on Big Water’s Edge

fishinkid2010 · 06-07-2010, 01:43 PM

Any drive will work, but the new ones designed for the click and go system will not work with the old twist cams unless modified. Change out the metal pin that goes through the mirage drive, (the pin that rests in the molded grooves of the kayak). Its a very simple fix, just buy the pin you need from Fastlane and used a rubber mallet to push out the old pin, insert the new one, and pound it through with the hammer until it sticks out evenly on either side of the drive.

06-07-2010, 01:43 PM	#5
fishinkid2010 Senior Member Join Date: Nov 2008 Location: La Mesa Posts: 386	Any drive will work, but the new ones designed for the click and go system will not work with the old twist cams unless modified. Change out the metal pin that goes through the mirage drive, (the pin that rests in the molded grooves of the kayak). Its a very simple fix, just buy the pin you need from Fastlane and used a rubber mallet to push out the old pin, insert the new one, and pound it through with the hammer until it sticks out evenly on either side of the drive. __________________ Need a custom rod wrapped? PM me! http://s686.photobucket.com/albums/vv222/fishinkid2010/Sample%20Rod%20Wrapping/?albumview=slideshow

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode