Kayak Thru Hull Transducer - Kayak Fishing Adventures on Big Water’s Edge

peguinpower · 02-04-2009, 05:40 PM

I was aware that epoxy and a real shoot thru hull transducer would work. But considering that Lowrance has a disclaimer that shooting thru the hull would weaken the FF signal and degrade arches, I opted to go whole hog.

Also, if I used a real polyethylene epoxy like poly-welder

http://www.tapplastics.com/shop/product.php?pid=435&

there is no removing the transducer. EVER

/bing

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

02-04-2009, 05:40 PM	#11
peguinpower bing! Join Date: Mar 2007 Location: socal Posts: 246	I was aware that epoxy and a real shoot thru hull transducer would work. But considering that Lowrance has a disclaimer that shooting thru the hull would weaken the FF signal and degrade arches, I opted to go whole hog. Also, if I used a real polyethylene epoxy like poly-welder http://www.tapplastics.com/shop/product.php?pid=435& there is no removing the transducer. EVER /bing