|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
09-27-2021, 10:32 AM | #1 |
Senior Member
Join Date: Apr 2013
Location: Los Angeles
Posts: 1,897
|
Hell of a surprise. Not kayak related.
4RUNNERE AND OPOSSUM
Three days after I parked a perfect running 4Runner, I started it and engine started running rough. In seconds the “check engine” light came on as well as “off road” light. Although my first profession was auto mechanics with ASE certification, I do not have all the diagnostic equipment that are needed today to work on automobiles these days. And paying the high cost of dealer repair work goes against my grain, I decided to take a peak under the hood, as the saying goes. My existing OBD 2 code reader was not setup for 2017 year, so I had to spend $160.00 to get a newer version. It indicated PO301, engine misfire, cylinder #1. The most common cause being spark plug, or ignition coil, I went ahead and ordered a complete set of each from Amazon. I was so disappointed at the reliability of Toyota, especially 4 Runner since neither part was due to replacement for a long time from now. I was further concerned about taking it on the road for my ice fishing trips, where there are no cell signals. As I removed the air filter housing to access the #1 ignition coil and spark plug, I was shocked, relieved and happy for restoration of my faith as to the reliability of Toyota 4Runner. It seemed something had made a temporary nest on top of the V6 engine. 1-Chewed #1cylinder injector wire, and chewed wire cover tube of #3 cylinder. 2-Chewed outer wire casing and possible bird bone. My money is on an opossum as the culprit. After I spliced a new wires and put on new cover tubes, the engine was back to its wonderful smooth running. Once I erased the “check engine” light with the new OBD 2 code reader, the “off road” light went off too. That is a puzzle, since the push button for the “off road” light was not turning the light off. Now after the codes are erased, everything is back to normal. However, I have one more important issue to deal with. How do I prevent future problems with the critter that caused the problem? For now, I used some ¼” hardware cloth to sort of fill the space and protect the injector wiring. Lastly, my wife told me about a lawsuit against Toyota that was dismissed. It seems that Toyota is using a soy based plastic as wire insulation. That has been seen by other Toyota owners as reason their vehicles being damaged by critters. https://www.carcomplaints.com/news/2...-lawsuit.shtml As if I did not have enough issues to deal with these days. |
Thread Tools | |
Display Modes | |
|
|