01-13-2015, 11:19 AM | #1 |
Senior Member
Join Date: May 2007
Location: Palos Verdes
Posts: 1,857
|
KISS Hoopnet Rack
Keep it simple stupid...
I have PVC hoop rack that fits over my Hobie bait tank that I use when I'm crabbing and fishing and it works great...but I saw a very simple design when I took some photos of Tony and George launching their PA's last week for some Lobster hooping. It looked like they used 3/4" EMT conduit because of the flair out that the pipe has at the junction, and it looked like it fit perfect in the rear scupper holes. It looked so simple I had to try one... I used regular PVC and fittings although I used the black washers from a 3/4" compression fitting to cushion the contact point on the PA. I used an 18" piece of 1" PVC pipe and then fittings to reduce to a 6" long piece of 3/4"PVC pipe. Thanks Guys it works great...!
__________________
Jim / Saba Slayer |
Thread Tools | |
Display Modes | |
|
|