|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
09-17-2012, 01:02 PM | #5 |
Currently @ MLO Territory
Join Date: Dec 2010
Location: Under the Shadow
Posts: 2,290
|
Thank You Master Fujimoto, i mean Tony the grand Splinter of the teenage mutant ninja turtles. To calibrate Temperature: 1. Select the Temperature Calibration text box from the Installation menu and press enter. The Water Temperature Calibration dialog box will appear. 2. Use the arrow keys to enter the percentage difference between temperature sources. Select OK and press enter. Temperature Averaging Averages temperature by measuring temperature data at a selected interval. Temperature intervals range from one to 30 seconds. If you select five seconds, your temperature will be averaged using measurements taken every five seconds. Water Temp calibration dialog box NOTE: If the temperature sensor is reading a lower temperature than the other temperature source, you will input a positive (+) percentage. Conversely, a negative (–) percentage will be entered if the temperature sensor is reading a higher temperature than the other temperature source.
__________________
Team: Disbanded You only have one chance in this life...make the right decision(s)...so you don't regret it
|
Thread Tools | |
Display Modes | |
|
|