Plano Box for Prowler 13 - Kayak Fishing Adventures on Big Water’s Edge

Sebastian · 10-06-2008, 02:11 PM

Hello All,

Does anyone know the sku or product number for the Plano box that fits behind the seat of the Prowler 13?

Thanks!

Sebastian

prowlerdude · 10-06-2008, 02:23 PM

I picked mine up at OEX-Anglers yak shack. Call Rik, if he doesnt have one Im sure he can get it. SKU was 1612. I tweeked min to hold my light, rods and bait tank battery with a deconnector and put the swich under the auxillary lid

dgax65 · 10-06-2008, 02:38 PM

I think this is what you're looking for

Plano 1612-50 Deep Storage Case

This model is 15" x 8" x 10" You might want to measure the space on the kayak just to verify. Plano also makes larger version of this case.

You can find them at West Marine and other boating stores. They are probably cheaper if you can find them at Walmart or Target.

Sebastian · 10-06-2008, 03:17 PM

Thanks all.

If possible, can you post pictures of your installs for FF and accessories. I am most interested in how you all are making the most use of the limited space up front.

Thanks again!

prowlerdude · 10-06-2008, 03:39 PM

Here is what I did. I got a diamond mount for the rail and put the FF there and then put a RAM revolution in the middle spot. I also have the "tub" also. I used cut outs from an old ("Honey have you seen the cutting board") cutting board as backing for strength. I run the fishfinder off rechargeable AA batteries and keep them in a small drybag. I mounted the transducer in goop and have had no problem.

Hope this helps

Mike

dgax65 · 10-06-2008, 04:39 PM

When I had a Prowler I used the Plano box for the battery and my tackle. I also put the switches in the little compartment on the lid of the box.

On one of my Prowlers I put the FF forward of the center console. I used RAM and Tight-Lok articulated rod holders.

My first Prowler had a RhynoBar similar to the ones installed on the Drifter and X-Factor in the picture above. I think the RhynoBar set-up was the most effective of the various versions.

prowlerdude · 10-06-2008, 04:45 PM

RhinoBar looks pretty cool. That would sure save a lot of space

Sebastian · 10-06-2008, 07:52 PM

Thanks for the quick reply guys. I appreciate the help! I bought the Scotty bar and some accessories and will give that a try. Just have to find the time to mount them and test....

10-06-2008, 02:11 PM	#1
Sebastian Member Join Date: Jul 2005 Location: Carlsbad Posts: 35	Plano Box for Prowler 13 Hello All, Does anyone know the sku or product number for the Plano box that fits behind the seat of the Prowler 13? Thanks! Sebastian

10-06-2008, 02:38 PM	#3
dgax65 Guerro Grande Join Date: Jan 2006 Location: Houston, TX Posts: 629	I think this is what you're looking for Plano 1612-50 Deep Storage Case This model is 15" x 8" x 10" You might want to measure the space on the kayak just to verify. Plano also makes larger version of this case. You can find them at West Marine and other boating stores. They are probably cheaper if you can find them at Walmart or Target. __________________ Douglas Gaxiola Team No Fish- Amateur Staff

10-06-2008, 04:39 PM	#6
dgax65 Guerro Grande Join Date: Jan 2006 Location: Houston, TX Posts: 629	When I had a Prowler I used the Plano box for the battery and my tackle. I also put the switches in the little compartment on the lid of the box. On one of my Prowlers I put the FF forward of the center console. I used RAM and Tight-Lok articulated rod holders. My first Prowler had a RhynoBar similar to the ones installed on the Drifter and X-Factor in the picture above. I think the RhynoBar set-up was the most effective of the various versions. __________________ Douglas Gaxiola Team No Fish- Amateur Staff

10-06-2008, 02:23 PM	#2
prowlerdude Senior Member Join Date: May 2007 Location: Clairemont Posts: 116	I picked mine up at OEX-Anglers yak shack. Call Rik, if he doesnt have one Im sure he can get it. SKU was 1612. I tweeked min to hold my light, rods and bait tank battery with a deconnector and put the swich under the auxillary lid

10-06-2008, 03:17 PM	#4
Sebastian Member Join Date: Jul 2005 Location: Carlsbad Posts: 35	Thanks all. If possible, can you post pictures of your installs for FF and accessories. I am most interested in how you all are making the most use of the limited space up front. Thanks again!

10-06-2008, 03:39 PM	#5
prowlerdude Senior Member Join Date: May 2007 Location: Clairemont Posts: 116	Here is what I did. I got a diamond mount for the rail and put the FF there and then put a RAM revolution in the middle spot. I also have the "tub" also. I used cut outs from an old ("Honey have you seen the cutting board") cutting board as backing for strength. I run the fishfinder off rechargeable AA batteries and keep them in a small drybag. I mounted the transducer in goop and have had no problem. Hope this helps Mike

10-06-2008, 04:45 PM	#7
prowlerdude Senior Member Join Date: May 2007 Location: Clairemont Posts: 116	RhinoBar looks pretty cool. That would sure save a lot of space

10-06-2008, 07:52 PM	#8
Sebastian Member Join Date: Jul 2005 Location: Carlsbad Posts: 35	Thanks for the quick reply guys. I appreciate the help! I bought the Scotty bar and some accessories and will give that a try. Just have to find the time to mount them and test....