Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion
Home Forum Online Store Information LJ Webcam Gallery Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 09-02-2017, 02:29 PM   #1
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Hook 5: Bought in July, Dead by September - Help?

This thing was awesome while it worked - and I've come to rely on it.

But now it seems to be dead.

Nope, didn't ever roll the kayak or dunk the unit (I did wash it off with freshwater after each use).

Nope, it's not the battery or connections - I bought a brand new Nocqua lithium battery for it and checked voltage all the way to the red terminal end of power - over 12volts going into the unit.

Nope, not any butt connectors screwing things up - again, I checked it with voltmeter, 12volts all the way the red connecting nut.

Symptoms: Went to power it up, Hook5 logo came on for a minute or two and then screen went black. Subsequent attempts, a brief flash on the screen and then nothing.

Lowrance Customer Support isn't available on the weekend (I already tried to call).

Any advice for me? I know there will be wide ranging opinion but what are you guys liking out there in terms of reliability? I like the split screen feature of the Hook5 with GPS and side scan screens side by side - is there something better out there?

I'd hate to kiss 360 bucks good bye but if there's something out there that's much better I might consider it.

Anybody else have similar problems with a Hook5? I'm all ears - just trying to prepare myself for the fight to come.
CON KSO is offline   Reply With Quote
Old 09-02-2017, 02:34 PM   #2
Iceman
Administrator
 
Iceman's Avatar
 
Join Date: Mar 2005
Location: 1-2 miles off the point
Posts: 6,948
regardless of your voltmeter reading it seems like symptom of low voltage, I would start my testing with a different battery if possible.
__________________
Iceman is offline   Reply With Quote
Old 09-02-2017, 02:44 PM   #3
vincegat95
Junior
 
Join Date: Aug 2014
Posts: 6
I was in the same predicament, also bought mine in July and tested everything and thought everything, meaning batteries, connectors etc. were ok. Make a long story short, it was the power cable(red). Went to West Marine together with the unit - which I strongly advise, and have it plugged in with one amongst the display and check to see if it powers up, thankfully mine did! And buy the replacement cable. Hopefully it solves the problem.
vincegat95 is offline   Reply With Quote
Old 09-02-2017, 02:48 PM   #4
jorluivil
Senior Member
 
jorluivil's Avatar
 
Join Date: Apr 2010
Posts: 6,856
Occam's razor (or Ockham's razor) is a principle from philosophy. Suppose there exist two explanations for an occurrence. In this case the simpler one is usually better. Another way of saying it is that the more assumptions you have to make, the more unlikely an explanation is.
__________________


www.facebook.com/Teamsewer
jorluivil is offline   Reply With Quote
Old 09-02-2017, 02:52 PM   #5
jrip
Water dog
 
jrip's Avatar
 
Join Date: Jul 2015
Location: Burbank
Posts: 77
I found plug was arcing and burnt. Instead replacing the transducer cable, lt was cost effective just to replace the whole unit.
I make the battery connection now after connecting cable to the F.F.

Sent from my LG-TP260 using Tapatalk
jrip is offline   Reply With Quote
Old 09-02-2017, 04:27 PM   #6
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Quote:
Originally Posted by Iceman View Post
regardless of your voltmeter reading it seems like symptom of low voltage, I would start my testing with a different battery if possible.
Tested it with two different batteries - a lithium (Nocqua brand) replacement battery and a sealed lead acid battery - both won't get the unit to power up. Neither will the Hobie kit battery and all read approx. 12.8 volts at rest on my meter.

Wired the unit directly (through the power cable) to a brand new battery - nothing.
CON KSO is offline   Reply With Quote
Old 09-02-2017, 04:31 PM   #7
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Quote:
Originally Posted by jorluivil View Post
Occam's razor (or Ockham's razor) is a principle from philosophy. Suppose there exist two explanations for an occurrence. In this case the simpler one is usually better. Another way of saying it is that the more assumptions you have to make, the more unlikely an explanation is.
Ok - so,
CON KSO is offline   Reply With Quote
Old 09-02-2017, 04:32 PM   #8
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Quote:
Originally Posted by vincegat95 View Post
I was in the same predicament, also bought mine in July and tested everything and thought everything, meaning batteries, connectors etc. were ok. Make a long story short, it was the power cable(red). Went to West Marine together with the unit - which I strongly advise, and have it plugged in with one amongst the display and check to see if it powers up, thankfully mine did! And buy the replacement cable. Hopefully it solves the problem.
Ok - that's a good next step - I'll go see if I can test the unit out at West Marine and report back. BTW - did they sell replacement power cables there at West Marine?
CON KSO is offline   Reply With Quote
Old 09-02-2017, 05:06 PM   #9
makobob
Baitless on Baja
 
makobob's Avatar
 
Join Date: May 2013
Location: Vista California, Gonzaga, San Quintin, Asuncion, Mag Bay
Posts: 4,250
Should be under warrantee, if you got it at WEST Marine they might just trade it out.
__________________
http://www.mako-ville.com

Home 760-630-4470
Cell 760-520-2514

YES YOU CAN
makobob is offline   Reply With Quote
Old 09-02-2017, 06:58 PM   #10
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Quote:
Originally Posted by makobob View Post
Should be under warrantee, if you got it at WEST Marine they might just trade it out.
Yes, still under warranty.

I went to West Marine and they let me hook it up to the power cable for their Hook5. It was a NO GO. So, my assumption is that the unit is defective.

I'm going to call up Lowrance on Tuesday and see how that whole thing goes.

Anybody ever call up Lowrance for an issue like this? Any words of wisdom/advice/warnings?
CON KSO is offline   Reply With Quote
Old 09-04-2017, 02:54 PM   #11
TheBentRod
Senior Member
 
TheBentRod's Avatar
 
Join Date: Jun 2010
Location: Murrieta, CA and Bonney Lake, WA
Posts: 425
Here's how I fixed the issue.

Quote:
Originally Posted by TheBentRod View Post
For me the problem was the backlight was down to 0. Try to adjust the backlight. It is easy to mess up while on the water. Let me know what happens.

Since it actually comes on, it is not a power issue. Hook it up to your battery in the dark and see what you see on the screen. You have to be careful on the water if you lean on the power button and the left arrow, it will dim the display.
TheBentRod is offline   Reply With Quote
Old 09-04-2017, 10:15 PM   #12
Sheephead
Senior Member
 
Join Date: Feb 2015
Location: San Diego
Posts: 115
Lowrance's hook models suck! I've had 5 break on me. Each one only lasting 2-3 months. Granted I fish 30-50 times in that time frame it wont matter if you baby the shit out of them. They will still corrode. Somehow, water got into your sd card slot and corroded the inside. It might not look corroded but it sounds like thats your problem. If you try turning it on/ off enough it will probably start to lock on a white screen when powered up or flash in rainbow colors.

I'd recommend switching to an Elite 7-Ti if you can afford it. Haven't had a single problem with it yet and it sucks having this corrosion issue happen when you need it the most. I'd send it in to lowrance for a replacement. If a new one doesn't get back to you in 2 weeks or less call lowrance again because they probably forgot about you. Took me over a month on 2/5 occasions...
Sheephead is offline   Reply With Quote
Old 09-05-2017, 09:45 AM   #13
bolocop
Senior Member
 
Join Date: Aug 2012
Posts: 332
X2 on the SD card slot. Do youself a favor and buy from West Marine and buy the extended warranty.

I had a Hook 5 for all of one trip, rinsed it down and the SD card slot had a punky gasket. Returned it and got a new one.

On the new one, I applied clear caulk around the door. If you need to access the door, just scrape the caulk off, do your upgrades, etc and then reapply the caulk. Pretty cheap solution with minimal downside.
bolocop is offline   Reply With Quote
Old 09-05-2017, 09:52 AM   #14
goldenglory18
Senior Member
 
goldenglory18's Avatar
 
Join Date: Feb 2015
Location: Seattle Area
Posts: 861
I've heard nothing but negative on the Hook series, even from my freshwater bretheren in AZ. Same type of issues, same eventual solution (return and upgrade to something else.)
goldenglory18 is offline   Reply With Quote
Old 09-05-2017, 09:17 PM   #15
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
Weak link

Quote:
Originally Posted by bolocop View Post
X2 on the SD card slot. Do youself a favor and buy from West Marine and buy the extended warranty.

I had a Hook 5 for all of one trip, rinsed it down and the SD card slot had a punky gasket. Returned it and got a new one.

On the new one, I applied clear caulk around the door. If you need to access the door, just scrape the caulk off, do your upgrades, etc and then reapply the caulk. Pretty cheap solution with minimal downside.
On a lot of models . Great idea though.
TJones is offline   Reply With Quote
Old 09-06-2017, 08:17 PM   #16
Dannowar
Senior Member
 
Dannowar's Avatar
 
Join Date: Aug 2012
Posts: 1,823
Im willing to bet your brightness is all the way down. Power it up and when it goes black press the power button quickly a few times and see if the brightness goes back up
__________________
"Beware the lollipop of mediocrity; lick it once and you’ll suck forever." — Brian Wilson
Dannowar is offline   Reply With Quote
Old 09-07-2017, 04:57 PM   #17
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Called Lowrance customer service and they sent me a return authorization number and so I'm sending it back in.

Tried to see if the screen was just dimmed way down by doing what some of you suggested (power it up, push power a few times etc.) and.... nothing. It's not dimmed down because it doesn't even power up. It's dead.

I'm not sure if they'll allow me to upgrade but I'll try... and next time I will buy from West Marine and get the upgrade warranty.

I'll keep you posted on how this all works out.
CON KSO is offline   Reply With Quote
Old 09-07-2017, 09:08 PM   #18
CON KSO
Member
 
Join Date: Jan 2017
Posts: 83
Pretty funny - just looked closely at the return label Lowrance sent to me and it turns out the address is up at the Otay Mesa border crossing. It's 12 miles from my house so I'm going to drive it over there.

The place is a freight forwarding company so my buddy (who lives near La Paz) and I are laughing - we think they just freight forward the unit to the little dude who fixes all his electronics.

He told me that one of his captains once sank one of his boats - they took all the electronics into town and the guy fixed every single one of them - good to this day.

He also told me that regardless of what the unit says - it's not splash proof/water proof.

Do you guys run your units exposed to splashing etc? I'm thinking about putting a plastic bag over mine when I'm out there from now on.

A clear one.
CON KSO is offline   Reply With Quote
Old 09-08-2017, 09:26 AM   #19
Bruntoj
Senior Member
 
Join Date: Jan 2016
Location: San Diego County
Posts: 168
I'm on my 2nd Hook5. The first got splashed and dunked in the surf and failed after about 6 months. Corrupted graphics, unresponsive buttons, rebooting itself etc.

Swapped out at WestMarine because I had he extended warranty (after a bit of runaround from them) and now I drybag the unit during launch and landing. It's been another 6 months and so far I've only had one day when the buttons didn't respond.
Bruntoj is offline   Reply With Quote
Old 09-08-2017, 03:58 PM   #20
LJ H2Oman
Hunter
 
Join Date: Sep 2016
Location: San Diego
Posts: 44
the reason for the address being at the border crossing is that Lowrance has a factory down by Ensenada.
__________________
Robert V

<"))))><

Hobie Revo 13 . . . not as sporting . . . but a welcome upgrade from my 1966 longboard!
LJ H2Oman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 09:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.