Flush mount rod holder extension - Kayak Fishing Adventures on Big Water’s Edge

William Novotny · 02-20-2012, 09:49 AM

Ive been seeing alot of really nice mods on here lately and it got my brain working. This is a simple but useful creation I came up with, mainly because I like the options that the ram mount tube holders give you but I dont like alot of things protruding when it comes to loading and unloading....plus im cheap. Its just a couple pieces of pvc w/ a 45° elbow. (excuse the color, this was a special order for big one)

fits snug and can be adjusted any number of ways

I'm going to make this for all 4 if my flush mounts using black pvc so it looks cleaner and I will also flare out the tips of the pvc so its easier to put the rods in.

StinkyMatt · 02-20-2012, 10:47 AM

Matt's Green Monster is ALIVE!

Although, a little on the flamin side.

William Novotny · 02-20-2012, 10:55 AM

Decided to not fish today so I could install the transducer and have a full day of cure time. Next is the livewell, should be operational by next week. I tried to do the Green Monster justice on my maiden voyage with her but walked away yesterday with a big old skunk.

Mr Fishback · 02-20-2012, 11:00 AM

Nice! I made something similar for trolling on my Outback. Dunno how much play the PVC has in the rod holder, but I added some closed cell foam around the base and wrapped it in electrical tape to keep it from moving around.

- Joseph, San Diego

TEAMFISH · 02-20-2012, 11:28 AM

If you add a 1-1/2 pvc coupler to the bottom side it will eliminate play. You can also notch the coupler so that it locks on to the gimbal hump built into the rod holder. Hope that makes sense, I kinda did the same thing for a Go-Pro mount and it came out pretty nice. I can take pictures if needed

Mr Fishback · 02-20-2012, 11:56 AM

Ahh, I gotta try that!

- Joseph, San Diego

Salt Water Flies · 02-20-2012, 01:04 PM

If you know someone with a lathe they can turn 1 1/4" PVC to fit. You have to take about .040 off total. Be careful though the plastic likes to grab and it can go flying if you are not careful. Only use a metal lathe and a center. That's how I did mine.
Tony

StinkyMatt · 02-20-2012, 11:31 PM

Just take a belt sander and go to town. Grind that baby down and it will fit nice and snug.

William Novotny · 02-21-2012, 07:54 AM

Quote:

Originally Posted by StinkyMatt

Just take a belt sander and go to town. Grind that baby down and it will fit nice and snug.

Agreed

we are getting into some pretty fancy equipment for some scrap pvc I had laying around! Lol

Salt Water Flies · 02-21-2012, 08:34 AM

LOL

Yeah I'm lucky I have a small lathe. After the Navy, I went into machining and welding. Went back to school after the machining trades started to crap out. Got my bachelor and master degrees and now I'm an adjunct humanities prof., just in time for that career to crap out. lol Thank god I fish, it's the only thing that keeps my sanity sometimes.
Tony

GregAndrew · 02-21-2012, 04:46 PM

If you heat up a 6 - 8 inch section of pvc on your stove, and stretch it by about 1/2 inch, it should shrink the diameter to something very close. Then some very minor sanding to fine tune it. Keep the pvc spinning the entire time you are heating it and don't heat it any more than you need to for stretching it.

GregAndrew · 02-21-2012, 04:47 PM

Also, start with enough pvc that you have extra on either end to hold on to. Then cut off one end.

TEAMFISH · 02-21-2012, 05:04 PM

This fits real nice in my flush mounts, Holds the Go-Pro pretty well too.PVC POLE 002.jpg

PVC POLE 003.jpg

YakMedic · 02-21-2012, 07:40 PM

Man I must be really short, those rod holders seemed a little to far for me in there current location. You gotta get some blood on that thing. Sorry again I left it smelling like halibut when I dropped it off to you....

William Novotny · 02-21-2012, 09:23 PM

Quote:

Originally Posted by YakMedic

Man I must be really short, those rod holders seemed a little to far for me in there current location. You gotta get some blood on that thing. Sorry again I left it smelling like halibut when I dropped it off to you....

No worries, I got it a little bloody myself today with a few more butts in the trunk.

02-20-2012, 09:49 AM	#1
William Novotny The carpetbagger Join Date: Sep 2011 Location: tha newps Posts: 1,474	Flush mount rod holder extension Ive been seeing alot of really nice mods on here lately and it got my brain working. This is a simple but useful creation I came up with, mainly because I like the options that the ram mount tube holders give you but I dont like alot of things protruding when it comes to loading and unloading....plus im cheap. Its just a couple pieces of pvc w/ a 45° elbow. (excuse the color, this was a special order for big one) fits snug and can be adjusted any number of ways I'm going to make this for all 4 if my flush mounts using black pvc so it looks cleaner and I will also flare out the tips of the pvc so its easier to put the rods in. __________________ "The charm of fishing is that it is the pursuit of what is elusive but attainable, a perpetual series of occasions for hope." http://www.badinfluencetattoo.com/gallery.php?artist=21

02-20-2012, 10:55 AM	#3
William Novotny The carpetbagger Join Date: Sep 2011 Location: tha newps Posts: 1,474	Yep yep Decided to not fish today so I could install the transducer and have a full day of cure time. Next is the livewell, should be operational by next week. I tried to do the Green Monster justice on my maiden voyage with her but walked away yesterday with a big old skunk. __________________ "The charm of fishing is that it is the pursuit of what is elusive but attainable, a perpetual series of occasions for hope." http://www.badinfluencetattoo.com/gallery.php?artist=21

02-21-2012, 05:04 PM	#13
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	This fits real nice in my flush mounts, Holds the Go-Pro pretty well too.PVC POLE 002.jpg PVC POLE 003.jpg Last edited by TEAMFISH; 02-21-2012 at 05:06 PM. Reason: forgot to mention

02-20-2012, 10:47 AM	#2
StinkyMatt Senior Member Join Date: Jun 2010 Location: Under a bridge Posts: 2,169	Matt's Green Monster is ALIVE! Although, a little on the flamin side.

02-20-2012, 11:00 AM	#4
Mr Fishback Member Join Date: Jan 2011 Location: San Diego, CA Posts: 71	Nice! I made something similar for trolling on my Outback. Dunno how much play the PVC has in the rod holder, but I added some closed cell foam around the base and wrapped it in electrical tape to keep it from moving around. - Joseph, San Diego

02-20-2012, 11:28 AM	#5
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	If you add a 1-1/2 pvc coupler to the bottom side it will eliminate play. You can also notch the coupler so that it locks on to the gimbal hump built into the rod holder. Hope that makes sense, I kinda did the same thing for a Go-Pro mount and it came out pretty nice. I can take pictures if needed

02-20-2012, 11:56 AM	#6
Mr Fishback Member Join Date: Jan 2011 Location: San Diego, CA Posts: 71	Ahh, I gotta try that! - Joseph, San Diego

02-20-2012, 01:04 PM	#7
Salt Water Flies Junior Join Date: Feb 2012 Posts: 28	If you know someone with a lathe they can turn 1 1/4" PVC to fit. You have to take about .040 off total. Be careful though the plastic likes to grab and it can go flying if you are not careful. Only use a metal lathe and a center. That's how I did mine. Tony

02-20-2012, 11:31 PM	#8
StinkyMatt Senior Member Join Date: Jun 2010 Location: Under a bridge Posts: 2,169	Just take a belt sander and go to town. Grind that baby down and it will fit nice and snug.

02-21-2012, 08:34 AM	#10
Salt Water Flies Junior Join Date: Feb 2012 Posts: 28	LOL Yeah I'm lucky I have a small lathe. After the Navy, I went into machining and welding. Went back to school after the machining trades started to crap out. Got my bachelor and master degrees and now I'm an adjunct humanities prof., just in time for that career to crap out. lol Thank god I fish, it's the only thing that keeps my sanity sometimes. Tony

02-21-2012, 04:46 PM	#11
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	If you heat up a 6 - 8 inch section of pvc on your stove, and stretch it by about 1/2 inch, it should shrink the diameter to something very close. Then some very minor sanding to fine tune it. Keep the pvc spinning the entire time you are heating it and don't heat it any more than you need to for stretching it.

02-21-2012, 04:47 PM	#12
GregAndrew Senior Member Join Date: Mar 2009 Posts: 2,384	Also, start with enough pvc that you have extra on either end to hold on to. Then cut off one end.

02-21-2012, 07:40 PM	#14
YakMedic Senior Member Join Date: Feb 2011 Location: Wrightwood Posts: 623	Man I must be really short, those rod holders seemed a little to far for me in there current location. You gotta get some blood on that thing. Sorry again I left it smelling like halibut when I dropped it off to you....