|
Home | Forum | Online Store | Information | LJ Webcam | Gallery | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
01-15-2010, 11:07 AM | #1 |
Junior
Join Date: May 2007
Posts: 2
|
Mirage drive question
I have a quick question regarding my older Mirage drive. (It has the stainless sprockets) On each sprocket, one of the sprocket guides are loose on the shaft. One is loose in the front side of the fin, the other on the rear. Should I try to re-glue to the shaft somehow? I can't find any diagrams online to see if this is normal. Thanks! |
01-15-2010, 12:19 PM | #2 |
Olivenhain Bob
Join Date: May 2008
Location: Olivenhain, CA
Posts: 1,121
|
While there may be some members of this forum that can answer your question, you can probably get help quicker by going directly to Hobie Kayak support. http://www.hobiecat.com/support/index-kayak.html
You will need to register in order to view or post in the forums. I hope that this helps. Bob |
01-16-2010, 11:55 AM | #3 | |
Senior Member
Join Date: Sep 2006
Location: Bay Ho
Posts: 1,382
|
Quote:
-At the least your cables are probably stretched to the max. These cables are what creates the balanced tension to hold the drive together, around $100. if you add in pulleys, sprockets, axles, fins, you would be past the cost of a new drive and still have the old model. -The new drives are smooth and very efficient, with all the bugs worked out. |
|
Thread Tools | |
Display Modes | |
|
|