Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 07-25-2008, 01:45 AM   #1
fisher2
Junior
 
Join Date: Jul 2008
Posts: 29
hey all

i just got a kayak its not anything special its a old town otter im o the east coast i fish fresh water i joined here because its hard to find anything about yak fishing for east coast and i plan on moving to cali eventallyim 15 my names eric and yea im from kingston ny on the hudson river is my yak terrtitory

any tips on how to make this leasure yak into a fishing yak would be helpful thank you and good morning sence its 1;46am there
fisher2 is offline   Reply With Quote
Old 07-25-2008, 06:08 AM   #2
bajadog
I eats what I kills
 
bajadog's Avatar
 
Join Date: Apr 2008
Location: San Diego
Posts: 393
Cheers.

I'd start with basics.

Flush mount rod holders, two at least.

http://www.kayakfishingsupplies.com/...-Holder/Detail

Leashes for your rods.

http://www.kayakfishingsupplies.com/...d-Leash/Detail

Padeyes to tie off leashes.

http://www.kayakfishingsupplies.com/...-strong/Detail
__________________
Please release bill-fish.
bajadog is offline   Reply With Quote
Old 07-25-2008, 10:37 AM   #3
TheSherThang
Member
 
TheSherThang's Avatar
 
Join Date: Feb 2008
Posts: 82
Safety Equipment:

Bilge Pump
PFD
Paddle Leash

Fishing Equipment:
Sonar (Fish Finder)
Drift Sock
Gaff
Rod Holders
Bait Tank

Always more you can do
TheSherThang is offline   Reply With Quote
Old 07-26-2008, 01:17 PM   #4
fisher2
Junior
 
Join Date: Jul 2008
Posts: 29
im a little paranoid of drilling holes in it whould there be anyway to get around drilling holes im new to boating in genral so i thik hole=sink even with all the foam in it
fisher2 is offline   Reply With Quote
Old 07-26-2008, 01:43 PM   #5
Willy
Senior Member
 
Join Date: May 2008
Location: La Jolla
Posts: 189
Yeah, there are ways around drilling holes in the boat, but you'll need to be creative. Here are 2 methods:

I rent my yaks from the Marine Corps, so I can't really drill holes into them, but I get them almost every weekend, so I do need pole holders.

1. So I've devised a PVC pipe pole holding system that I insert into the scupper holes in the kayak. Those are the holes that go through the yak to allow the water to drain out and keep the yak balanced. The thing looks like an "H" with small pipes to fit down into the drain holes, and then it forks up like deer antlers at the top with 4-2 inch wide tubes going up about 11 inches for my poles, net, gaff and the like. I just got crafty with the fittings for different PVC pipes at the hardware store to put the thing together. Here is a pic:
La Jolla Kelpin'.jpg

2. Another option is to use a milk crate. You can cut 2 inch diameter PVC pipes to about 11 inches long, and use hose clamps to attach them vertically to the inside corners of the milk crate. Then lash the crate behind you to the deck of the yak, and use the pipes as pole holders. The crate also comes in handy for storing xtra stuff. This method gets a little top heavy, which will affect your balance going into and out of the surf, like we do here in California. But in rivers and bays and such it's manageable, provided you secure it well enough. Like this:
cowboy clay fishin LJ.jpg

Hope this helps.

Willy

Last edited by Willy; 07-26-2008 at 02:12 PM. Reason: Added photos
Willy is offline   Reply With Quote
Old 07-26-2008, 09:26 PM   #6
fisher2
Junior
 
Join Date: Jul 2008
Posts: 29
i have a sik with no features i have the hole i sit in and thats it no elastic tiedowns or anything its pretty cramped on space
fisher2 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 05:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.