Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion

Reply
 
Thread Tools Display Modes
Old 09-07-2016, 07:16 PM   #1
InfidelYak
Member
 
InfidelYak's Avatar
 
Join Date: Sep 2016
Location: Socal
Posts: 37
New kayak paddle really worth it?

Anyone have a specific paddle they recommend? Did it really make a difference? I've only had one paddle and it's the one I currently use i just don't see a paddle being light enough to actually make a difference or not. So if you have experience in changing and upgrading your paddles, please share. Thanks!
InfidelYak is offline   Reply With Quote
Old 09-07-2016, 07:17 PM   #2
InfidelYak
Member
 
InfidelYak's Avatar
 
Join Date: Sep 2016
Location: Socal
Posts: 37
Btw im currently fishing from a Jackson Cuda 14, so my buddies are doing circles around me in their Hobies lol
InfidelYak is offline   Reply With Quote
Old 09-07-2016, 08:55 PM   #3
FISH11
Member
 
FISH11's Avatar
 
Join Date: Aug 2013
Location: Pine Valley when not fishing La Jolla
Posts: 2,643
A light weight carbon fiber shaft with fiberglass blades, makes big difference after hours of paddling. If your friends on Hobies are easily beating you, it's not the kayak they use, but that you need to put in more time on the water to get your arms, shoulders and back in better shape. Then you won't have much problem staying with them and even beating some of them.
__________________
MARK ......... 2016 MALIBU X FACTOR, 2020 SOLO SKIFF (Fishing Kayak on Steroids )
FISH11 is offline   Reply With Quote
Old 09-07-2016, 10:24 PM   #4
MrPatrick
Senior Member
 
MrPatrick's Avatar
 
Join Date: Jul 2007
Location: Waiting to launch
Posts: 1,381
By all means, go light. It makes a world of difference.


Sent from my iPad using Tapatalk
MrPatrick is offline   Reply With Quote
Old 09-07-2016, 10:44 PM   #5
jorluivil
Senior Member
 
jorluivil's Avatar
 
Join Date: Apr 2010
Posts: 6,856
I've fished off of Hobie kayaks for several years now so a high quality paddle isn't as important but when I had a paddle kayak I noticed a huge difference between a bargain box paddle and a carbon fiber paddle. If/when you decide to upgrade I'm almost certain that you will also notice a huge difference.
__________________


www.facebook.com/Teamsewer
jorluivil is offline   Reply With Quote
Old 09-08-2016, 12:23 AM   #6
King Saba
Senior Member
 
King Saba's Avatar
 
Join Date: Nov 2014
Location: SGV
Posts: 848
What everyone else said. Try getting the lightest paddle you can afford. If you're thinking that a couple of ounces won't make a big difference in how long you can paddle you will be sorely mistaken.
King Saba is offline   Reply With Quote
Old 09-08-2016, 09:01 AM   #7
InfidelYak
Member
 
InfidelYak's Avatar
 
Join Date: Sep 2016
Location: Socal
Posts: 37
Quote:
Originally Posted by King Saba View Post
What everyone else said. Try getting the lightest paddle you can afford. If you're thinking that a couple of ounces won't make a big difference in how long you can paddle you will be sorely mistaken.
That's actually exactly what I was thinking lol thanks for the advice gentleman, I'll definitley start looking into a lighter padde 👍
InfidelYak is offline   Reply With Quote
Old 09-08-2016, 09:09 AM   #8
taggermike
Senior Member
 
taggermike's Avatar
 
Join Date: May 2007
Location: Chula Vista
Posts: 1,589
I look at paddle yakking as being similar to distance running in some ways. After the first miles you may not appreciate a light high quality pair of shoes. But after miles and hours you definitely will. Same with paddles. It can take a long paddling session to show the superiority of a light CF paddle.
It's hard to describe well, but super light and stiff CF paddle have certain "feel" that you don't get with other paddles. Im using a Werner bent shaft CF paddle and is great. Mike
taggermike is offline   Reply With Quote
Old 09-08-2016, 01:12 PM   #9
bwana
Senior Member
 
bwana's Avatar
 
Join Date: Jun 2006
Location: El Toro, CA
Posts: 244
Kalliste

Over 10 years ago, after a long day on the water I hear water sloshing around inside my paddle shaft.

Purchased a Werner Kalliste the next day. What a difference a quality paddle makes.
bwana is offline   Reply With Quote
Old 09-08-2016, 04:18 PM   #10
radastaff
Senior Member
 
radastaff's Avatar
 
Join Date: Apr 2008
Posts: 314
been using the same BB bent shaft since I started
was waiting for it to break before I get a new one
but might make the plunge sooner

don't think its gonna ever break
and it weights a ton


P
radastaff is offline   Reply With Quote
Old 09-08-2016, 04:58 PM   #11
alanw
Made in U.S.A.
 
alanw's Avatar
 
Join Date: Oct 2012
Location: Dana Point
Posts: 1,625
I upgraded from a basic Crack of Dawn paddle to a carbon fiber one and it just felt so much better. I don't think I gained any speed, but the comfort level went way up. I'd recommend upgrading if you paddle any more than a mile or two.
__________________
Hobie PA 14 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Jackson Kraken ¸.·´¯`·.¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu X-Factor ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>
Malibu Stealth-12 ¸.·´¯`·.´¯`·.¸¸.·´¯`·.¸><(((º>


Its not a spelling B its a fishing B ~yakjoe
alanw is offline   Reply With Quote
Old 09-08-2016, 07:35 PM   #12
Dave Legacy
Senior Member
 
Dave Legacy's Avatar
 
Join Date: Mar 2015
Location: Hacienda Heights, CA
Posts: 427
I have a Werner Skagit which is a CF overlay straight shaft and plastic blades. It's not all that heavy, I never feel worn out from using it, BUT I swear that I can feel the flex in the blades when I dig in and to me that's a loss in efficiency and effectiveness.

Do fiberglass blades also flex during paddling?
Dave Legacy is offline   Reply With Quote
Old 09-08-2016, 08:15 PM   #13
YakDout
Brandon
 
YakDout's Avatar
 
Join Date: Jul 2011
Location: San Diego
Posts: 2,345
Does grizzly adams have a beard.
YakDout is offline   Reply With Quote
Old 09-08-2016, 09:21 PM   #14
King Saba
Senior Member
 
King Saba's Avatar
 
Join Date: Nov 2014
Location: SGV
Posts: 848
Quote:
Originally Posted by Dave Legacy View Post
I have a Werner Skagit which is a CF overlay straight shaft and plastic blades. It's not all that heavy, I never feel worn out from using it, BUT I swear that I can feel the flex in the blades when I dig in and to me that's a loss in efficiency and effectiveness.

Do fiberglass blades also flex during paddling?
I didn't notice any flexing when I used to paddle with my Werner Camano. The stiff blades on it gave out a lot of power with each stroke.
King Saba is offline   Reply With Quote
Old 09-09-2016, 09:26 AM   #15
TJones
Senior Member
 
TJones's Avatar
 
Join Date: Jan 2012
Posts: 2,526
so what is ?

a good high end paddle made for a performance kayak? i currently own a werner straight shaft full carbon correyvreckan that i have had for probably more than 3 years , maybe pushing 4. shortly after i got into kayaking, i brought in my original hobie paddle and matched it up with something similar at the local OEX shop. . . the blade on this paddle is huge and is not suited for paddling full time, unless you have a fitness build of an endurance paddler. this is probably the perfect paddle for hobie peddle kayaks where only quick spurts of speed are needed such as when launching or landing. since relying on the original hobie paddles in emergency situations is not ideal , that lead me to buying this paddle. anyway, i was looking at some performance paddle kayaks for fishing my local waters like "BU" that have other than ideal surf conditions where hobie kayaks are not the best suited. so what is a good performance high end paddle ? i was looking at the cyprus hooked. any feedback would be appreciated. needless to say bending branches is a company that has been around for a long time , so this is a high possibility. also to add, i am definitely ready to spend the extra money to get the lightest paddle possible and believe that this will bring on fatigue not as quickly, especially in other than ideal paddling situations.
TJones is offline   Reply With Quote
Old 09-09-2016, 12:16 PM   #16
HobieOneCanoebe
Senior Member
 
HobieOneCanoebe's Avatar
 
Join Date: May 2016
Location: Encinitas
Posts: 200
I have the the werner bent shaft carbon paddle it's a necessity I would go with anything werner
HobieOneCanoebe is offline   Reply With Quote
Old 09-09-2016, 12:19 PM   #17
HobieOneCanoebe
Senior Member
 
HobieOneCanoebe's Avatar
 
Join Date: May 2016
Location: Encinitas
Posts: 200
TJones my Hobie quest 11 handles great in big surf if you want a cheaper performance yak I've ridden 6ft+ surf on it
HobieOneCanoebe is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 08:23 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.