Reversing default height vantage ct seat. - Kayak Fishing Adventures on Big Water’s Edge

YakDout · 10-29-2015, 10:47 AM

While I can't take credit for this, it was a good
Modification for me. I hate leaning forward and the seat position lowering to the hull. When I did the mod I noticed the spring wasn't tight enough. I ended up putting a small screwdriver in the spring and twisting it a good turn or two in the right direction to tighten it up. Works great now.

http://www.seqic.com.au/hobie-advent...tage-seat-mod/

octico · 10-29-2015, 10:56 AM

Thanks! This drove me nuts too.

2-Stix · 03-25-2016, 12:55 PM

Yakdout...once again I followed your lead. Set this action up last night. Thanks for the post.

YakDout · 03-25-2016, 01:05 PM

Quote:

Originally Posted by 2-Stix

Yakdout...once again I followed your lead. Set this action up last night. Thanks for the post.

No problem. Hope it worked out for you.

Sent from my iPhone using Tapatalk

10-29-2015, 10:47 AM	#1
YakDout Brandon Join Date: Jul 2011 Location: San Diego Posts: 2,345	Reversing default height vantage ct seat. While I can't take credit for this, it was a good Modification for me. I hate leaning forward and the seat position lowering to the hull. When I did the mod I noticed the spring wasn't tight enough. I ended up putting a small screwdriver in the spring and twisting it a good turn or two in the right direction to tighten it up. Works great now. http://www.seqic.com.au/hobie-advent...tage-seat-mod/ Last edited by YakDout; 10-29-2015 at 11:09 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-29-2015, 10:56 AM	#2
octico Senior Member Join Date: Mar 2014 Location: The city of Orange Posts: 1,278	Thanks! This drove me nuts too.

03-25-2016, 12:55 PM	#3
2-Stix Senior Member Join Date: Aug 2015 Location: Ventura, CA Posts: 376	Yakdout...once again I followed your lead. Set this action up last night. Thanks for the post.