What #test for spectra - Kayak Fishing Adventures on Big Water’s Edge

spyakker · 07-02-2015, 04:36 PM

Just picked up a new set up. Got a phenix black diamond 809 and going to pair it with a daiwa saltist bg 35. Mainly going to use it for irons. Gong to spool it all the spectra and use a short fluro leader. I was thinking about 55#.
Any thoughts?

jruiz · 07-02-2015, 04:43 PM

55 is not very common, try 50 or 65

Gunner58 · 07-02-2015, 04:57 PM

50 will do anything you need it to do. All I can say is invest in a good reel with a smooth drag

Iceman · 07-02-2015, 05:05 PM

65# has NEVER failed me

spyakker · 07-02-2015, 05:06 PM

Quote:

Originally Posted by Iceman

65# has NEVER failed me

i was thinking 65 too, but not sure if it's suitable for the reel.
40/600
50/360

that is the braid capacity for the reel I'm looking at.

Nic D · 07-02-2015, 06:17 PM

surface iron - dont put braid on it. Go 40XXX Izor.

yoyo iron - 65lb Izor

just my opinion. Unless you never ever, ever backlash or unless you have a boat load of iron. Each back lash with braid = 1 iron donated to the sea

MarkT · 07-05-2015, 08:08 PM

I've got a couple of psw809h's. For throwing iron, your best bet is to have more mono than your casting distance so you're not casting with the spectra and the spectra is for backing. 50# spectra is fine with 40# mono and will give you more backing than 65# spectra. So probably 200yds of 50# spectra + 100yds of 40# will get it done. Besides, Diawa is awfully proud of that 55# spectra! An alternative is to go with all spectra with a 3' leader. I'd go with mono since it's not a stealthy presentation. I only use fluoro when it's needed and it isn't for YT.

07-02-2015, 04:36 PM	#1
spyakker Senior Member Join Date: Feb 2015 Location: Cypress Posts: 110	What #test for spectra Just picked up a new set up. Got a phenix black diamond 809 and going to pair it with a daiwa saltist bg 35. Mainly going to use it for irons. Gong to spool it all the spectra and use a short fluro leader. I was thinking about 55#. Any thoughts?

07-02-2015, 05:05 PM	#4
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	65# has NEVER failed me __________________

07-02-2015, 06:17 PM	#6
Nic D Senior Member Join Date: Feb 2010 Location: Clairemont Posts: 813	surface iron - dont put braid on it. Go 40XXX Izor. yoyo iron - 65lb Izor just my opinion. Unless you never ever, ever backlash or unless you have a boat load of iron. Each back lash with braid = 1 iron donated to the sea __________________ instagram - @DRAGO619

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-02-2015, 04:43 PM	#2
jruiz Large Member Join Date: Jul 2012 Location: La Verne, CA Posts: 1,011	55 is not very common, try 50 or 65

07-02-2015, 04:57 PM	#3
Gunner58 Member Join Date: May 2015 Posts: 81	50 will do anything you need it to do. All I can say is invest in a good reel with a smooth drag

07-05-2015, 08:08 PM	#7
MarkT Deep Release Specialist Join Date: Aug 2008 Location: Mission Viejo Posts: 94	I've got a couple of psw809h's. For throwing iron, your best bet is to have more mono than your casting distance so you're not casting with the spectra and the spectra is for backing. 50# spectra is fine with 40# mono and will give you more backing than 65# spectra. So probably 200yds of 50# spectra + 100yds of 40# will get it done. Besides, Diawa is awfully proud of that 55# spectra! An alternative is to go with all spectra with a 3' leader. I'd go with mono since it's not a stealthy presentation. I only use fluoro when it's needed and it isn't for YT.