PL premium instead of 3m 5200? - Kayak Fishing Adventures on Big Water’s Edge

gupppy · 03-27-2012, 04:54 PM

I've been looking to buy 3m 5200 fast cure or goop for a decent price locally but none avail.

Has anyone tried PL premium? http://www.simplicityboats.com/pl_testimonials.html

Looking to glue some things inside the hull and MAYBE some minor sealing if I do decide to drill through the plastic (nothing like on the bottom side nor big like for a transducer)

Any input appreciated.

TEAMFISH · 03-27-2012, 06:52 PM

Try pricing 4200 instead. 5200 is permanant and for use below the water line and yes very expensive, considering that once you open the tube it goes bad quickly.

gupppy · 03-27-2012, 07:07 PM

Quote:

Originally Posted by TEAMFISH

Try pricing 4200 instead. 5200 is permanant and for use below the water line and yes very expensive, considering that once you open the tube it goes bad quickly.

Im fine if I have to pay retail locally but the value of 5200 significantly dropped when shipping is a good fraction of the product itself. They don't have the 4200 either. :-/

gupppy · 03-27-2012, 07:11 PM

I stand corrected. I just saw that they carry the 3m 5200. It's avail when you actually don't search "5200". Too bad there's no fast cure though.

Lets_Fish · 03-27-2012, 07:22 PM

Guppy I see your in the IE. Have you checked with West Marine in Riverside?
http://www.westmarine.com/webapp/wcs...classNum=50259

gupppy · 03-27-2012, 07:48 PM

Quote:

Originally Posted by Lets_Fish

Guppy I see your in the IE. Have you checked with West Marine in Riverside?
http://www.westmarine.com/webapp/wcs...classNum=50259

Thanks for the heads up. I wasn't aware there was one nearby. I'm pretty shocked at the price. 3oz for $16.99 whereas lowes has 10oz for ~$19 shipped. Am I missing something here?

Baja_Traveler · 03-27-2012, 08:41 PM

I was surprised to see 5200 at my local home depot. Might want to check them out if you haven't already.

bubblehide · 03-27-2012, 09:01 PM

HomeDepot usually carries it in their paint section, but don't count on the employees knowing it's there. 3M does, I repeat DOES make this in a regular cure and a fast cure (24-48 hours if I recall correctly). The fast cure is a thicker consistency, where as the regular cure is a bit to watery if your using it anywhere on a non flat/level surface/finish.

gupppy · 03-28-2012, 05:08 AM

Thanks for the heads up fellas. I tried checking inventory for the fast cure online but they didn't have it. I guess I'll have to find time to go in.

bus kid · 03-28-2012, 06:20 AM

OEX sunset beach.PM Iceman.

MWC359 · 03-28-2012, 06:38 AM

McFadden-Daler hardware also has it in Corona

gupppy · 03-28-2012, 06:46 AM

thank you all for your input!

03-27-2012, 04:54 PM	#1
gupppy Senior Member Join Date: Nov 2010 Location: IE Posts: 171	PL premium instead of 3m 5200? I've been looking to buy 3m 5200 fast cure or goop for a decent price locally but none avail. Has anyone tried PL premium? http://www.simplicityboats.com/pl_testimonials.html Looking to glue some things inside the hull and MAYBE some minor sealing if I do decide to drill through the plastic (nothing like on the bottom side nor big like for a transducer) Any input appreciated.

03-28-2012, 06:20 AM	#10
bus kid Team Keine Zugehörigkeit Join Date: Nov 2010 Location: Way out there Posts: 2,854	OEX sunset beach.PM Iceman. __________________ Não alimente os trolls------------Don't feed the trolls---------------インタネット荒らしを無視しろ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-27-2012, 06:52 PM	#2
TEAMFISH Team Kayak Obesessions Join Date: Apr 2011 Location: Torrance Posts: 256	Try pricing 4200 instead. 5200 is permanant and for use below the water line and yes very expensive, considering that once you open the tube it goes bad quickly.

03-27-2012, 07:11 PM	#4
gupppy Senior Member Join Date: Nov 2010 Location: IE Posts: 171	I stand corrected. I just saw that they carry the 3m 5200. It's avail when you actually don't search "5200". Too bad there's no fast cure though.

03-27-2012, 07:22 PM	#5
Lets_Fish Senior Member Join Date: Oct 2009 Location: Wildomar, CA. Posts: 294	Guppy I see your in the IE. Have you checked with West Marine in Riverside? http://www.westmarine.com/webapp/wcs...classNum=50259

03-27-2012, 08:41 PM	#7
Baja_Traveler Senior Member Join Date: Nov 2005 Location: Table 17, Bay Park Fish Co. Posts: 943	I was surprised to see 5200 at my local home depot. Might want to check them out if you haven't already.

03-27-2012, 09:01 PM	#8
bubblehide Senior Member Join Date: Jun 2008 Posts: 552	HomeDepot usually carries it in their paint section, but don't count on the employees knowing it's there. 3M does, I repeat DOES make this in a regular cure and a fast cure (24-48 hours if I recall correctly). The fast cure is a thicker consistency, where as the regular cure is a bit to watery if your using it anywhere on a non flat/level surface/finish.

03-28-2012, 05:08 AM	#9
gupppy Senior Member Join Date: Nov 2010 Location: IE Posts: 171	Thanks for the heads up fellas. I tried checking inventory for the fast cure online but they didn't have it. I guess I'll have to find time to go in.

03-28-2012, 06:38 AM	#11
MWC359 Member Join Date: Jan 2012 Location: Corona Ca. Posts: 58	McFadden-Daler hardware also has it in Corona

03-28-2012, 06:46 AM	#12
gupppy Senior Member Join Date: Nov 2010 Location: IE Posts: 171	thank you all for your input!