Heavier line than reel is rated for?

[BrokeLoser]

With the exception of loading a braid / spectra backing do you spool your reel(s) with heavier line than they're rated for?

[bubblehide]

I have yet to see a reel rated for a specific line, they are rather rated for specific line capacity and drag.

Generally most people use a drag rating that is about 1/3 the lines breaking rating/strength while still having free spool, e.g., if I have a reel with 20 pounds of drag at full drag (with free spool) I might use 60 pound line, anything under that I would want to reduce the max drag. Any heavier line and I might want to consider increasing the max drag setting.

Another example or two: If I am using 6 pound line, I would want a 2 pound max drag setting. If I am using 15 pound line, I would want a 5 pound max drag setting...

The whole idea is that you pay attention to the wear of you line (it will wear) but don't lose fish unless you missed something (and you will miss wear unless you constantly change your top shots)

Does that make sense?

[dorado50]

Sure, but total yardage is compromised...

[onetriphudson]

Originally Posted by BrokeLoser

With the exception of loading a braid / spectra backing do you spool your reel(s) with heavier line than they're rated for?

I guess it depends on what you're trying to do and where? You wouldn't want to go fish 100# bluefin with a Penn 500 just because you filled it with 80#. Although you might catch some fish, you probably want to make things easier on yourself with a more balanced rig. For me, it all starts with the bait. If I'm using a small sardine, I'd choose the lightest circle hook that will help the sardine swim best, the lightest line that I care to get hooked on, and then the rod that will help me cast the sardine. I'd want enough line capacity to handle a long run (at least 200 yards). There are other times that heavier line is great for either flotation or just abrasion resistance like fishing jigs or topwater baits. But do whatever it takes man, part of the fun out there is figuring it out for yourself. If you got a clever idea, don't be afraid to give it a try. Lot's of guys miss the chance to try something new because they're afraid they won't catch fish. I've done the same thing lots of times and not caught fish!

[BrokeLoser]

Good points..
I was always taught to stay within the reel rating and I'm not really sure why. I remember pops saying: "If you hook something real huge that you know you have no hope of landing you can always crank down the drag and break him off."
But I think I'd rather take my chances of getting spooled and be able to man-handle bigs out of kelp or reef with heavier line.

[Fiskadoro]

Originally Posted by BrokeLoser

I think I'd rather take my chances of getting spooled and be able to man-handle bigs out of kelp or reef with heavier line.

Personally I like reels that hold between 300 and four hundred yards of line because I fish offshore and have had fish run that much line off a reel in deep water. That said for kayaking since the fish can pull you around capacity is not as big a deal.

If you want man-handle bigs out of kelp you need to go to spectra, it's the only way to go because mono will not cut kelp like spectra.

Jim

[BrokeLoser]

Originally Posted by Jim Day

Personally I like reels that hold between 300 and four hundred yards of line because I fish offshore and have had fish run that much line off a reel in deep water. That said for kayaking since the fish can pull you around capacity is not as big a deal.

If you want man-handle bigs out of kelp you need to go to spectra, it's the only way to go because mono will not cut kelp like spectra.

Jim

I know I sound like a total cheap ass but when you need to spool 5 reels with spectra it can get expensive...a whole lot more expensive than mono obviously. I've never fished spectra...does it literally hack through kelp? What if you're fishing a 30 - 40 foot top-shot / leader of fluoro in 30 - 45 feet of water?
Sorry for the stupidity..I'm just trying to understand.

[robmandel]

Originally Posted by BrokeLoser

I know I sound like a total cheap ass but when you need to spool 5 reels with spectra it can get expensive...a whole lot more expensive than mono obviously. I've never fished spectra...does it literally hack through kelp? What if you're fishing a 30 - 40 foot top-shot / leader of fluoro in 30 - 45 feet of water?
Sorry for the stupidity..I'm just trying to understand.

one thing about spectra is that you really never have to change it out. it will last a very long time. so, you fill up a reel 3, 4, or 5 times with mono and suddenly it's not such an expensive option.

there's two ways to view spectra: as extra backing and as the main line.

by running mostly spectra with 50yds of mono on top, you are fishing mono, but get alot more line cap, can change out the mono more often (you waste 3/4th the spool otherwise) and vary your line on the reel more, like stripping off the 50yds of 20# and running say 30# if needed. it also allows you (which is the best feature) to fish a heavier line weight in a smaller reel. so you can fish a sealine 20 with 20lb or even 25lb. straight mono I'll get at best 200yds of 20# mono on that reel, but with 40# spectra backing, I'll get 350yds +. it will do an easy 9-10 lbs drag (way over for 20#) and it's super light and casts like a dream. for larger reels, run 65# spectra.

as a main line, there are some places where it's a must. I throw the slugs and the other weedless lures in the kelp. can't do it with mono. need spectra to cut through. yes it does. or the bigger fish that hang in the kelp (like wsb, or so I've heard, as I know nothing about them!!). and for the slugs it's necessary due to the technique. or boiler rock calico. you need the no stretch part to pull them out.

as a main line, it's necessary for the deep water jigging too. also, alot of guys love it because you feel EVERYTHING. alot of the guys targeting halibut love it for that. but you gotta adjust your rod and reel accordingly. softer rods to absorb the shock as spectra doesn't stretch. also, back off on the drag a bit.

go out and drop $200 on spectra to fill up all your reels at once? no, probably a little overkill. but over time, and part of it is the quality of tackle itself, convert to spectra. it's a long run thing. I wouldn't fill up a penn 500 with spectra, kinda like putting racing rims and spoilers on a minivan.

as for drags, what I kinda like to do (and I've upgraded almost all my main reels to greased carbon fiber, which gives more and waaay smoother drag) is go no more than 70% of a reel's drag rating. then that let's me figure where I can reasonably fish a reel. sealine 20's run 15lbs max, so I say 10lb is the max I want to fish. which means I can go up to 30lb line. not an ideal 30lb reel, but about as good a 20# reel as going. 6-8 lbs drag easy without any binding or load issues, light, strong, casts great, and over 400yds of line. not too bad.

it has taken me a while to really migrate to and appreciate spectra. I love izor and sufix. but that's just me.

[grey zone]

You dont sound like a cheep ass and you are doing the right thing by asking questions. At first spectra does seem expensive but look at it as an investment to save you money in the long run. The savings start adding up by using much less mono which wears out much faster due to memory and stretch. When the spectra shows enough signs of wear reverse it and put the worn end to the spool. The stuff lasts forever.

Start slowly one reel at a time. Figure out what your going to use a specific reel for and fill it accordingly; 50-65lb spectra is perfect. I divide reels into two catagories bait and jig casting. Bait fishing is a short top shot 3-4 feet and as long as 40-50 feet, short is best around kelp. I fill my bait reels with spectra to a level that is 3/16" from the edge of the spool. At this level I can fish straight spectra a 3-4 foot top shot or put enough 20-40lb mono on the reel so with my longest cast the splice will not hit the guides. For jig casting fill the reel 1/2-2/3 full with spectra depending on the width of the reel. Use enough mono so with your longest cast the splice does not reach the guides.

[grey zone]

Whats the worse thing that could happen if the strength of your line is greater than the maximum drag pressure your reel can apply; your drag slips. If this is a problem it can be solved with a better reel. Unlike a reel a rod can break if you pull beyond its capacity, thats why they are rated. The only ratings I see on reels is for line capicity although the better ones will tell you the maximum drag pressure they can apply. I would not worry too much about the strength of the line, the most important thing is how the system works.

[bus kid]

For any thing on the surface or kelp beds I use 65lb braid min 200 yards with a top shot of 40 or 20 lb flouro. on my Daiwa 2 speed is John Brown 250 yrds with a 20 top shot of 25 yards. my 300 classic has 200 izor and 20 lb flouro.
jig master and prochallanger has 350 izor braid.. mostly used for rock fishing.

[Fiskadoro]

Originally Posted by BrokeLoser

With the exception of loading a braid / spectra backing do you spool your reel(s) with heavier line than they're rated for?

Well considering a TLD15 is rated for 15 pound or a international Penn 30sw is rated for 30 pound yep I'd say I have been doing it for decades. Ever fish eighty with a Penn50SW? and how many people actually only fish fifteen on a tld15 or 20 on a tld20?

There is not set rule but the key is finding a reel that has the strength gearing and drag to fish what you want to fish with it. Some you can beef up some fish stock, it's all ultimately about how they were built in the first place.

With spectra I'm now fishing forty on reels that would of been considered small bass reels a decade ago but they are beefed up to handle the heavier line and loads.

Jim