pad eye - Kayak Fishing Adventures on Big Water’s Edge

sasha · 01-28-2011, 01:12 PM

When you guys install the nylon pad eyes what type of bolts or screws do you use?? It seems that most are using the self tapping screws but it just dont seem strong enough for me. Does any one has any problems with it?? Or should i stick to using bolts with washers on the bottom?? I want it done right the first time.

Sasha

dsafety · 01-28-2011, 01:24 PM

OEX stocks a very good, (although expensive), plastic pop rivet. It works very well and should be stronger than any screws. You could also use stainless bolts and nuts which can found at Home Depot or most other hardware stores. OEX probably has those as well.

Bob

Jimmyz123 · 01-28-2011, 01:33 PM

Quote:

Originally Posted by sasha

When you guys install the nylon pad eyes what type of bolts or screws do you use?? It seems that most are using the self tapping screws but it just dont seem strong enough for me. Does any one has any problems with it?? Or should i stick to using bolts with washers on the bottom?? I want it done right the first time.

Sasha

Most people use the Pop rivets and I think that is your best way to secure them. If you are not going to be puttle a lot of stress on those then the screws will work fine. I have used screws but when I do I put a glob of Marine Goop on the screw just before it get all the way down. This will spread the goop around and seal the hole. OEX has bags of them for 7.99, I was just there today and saw those.

wiseguy · 01-28-2011, 01:55 PM

I use the ss screws with a dab of goop as well and have never had any problems with a pad eye.

Jimmyz123 · 01-28-2011, 01:59 PM

Quote:

Originally Posted by wiseguy

I use the ss screws with a dab of goop as well and have never had any problems with a pad eye.

The last time I did this I relized that there was no way the screws would have popped out. The goop forms a nice bond, and seal and is pretty strong. The nice thing about using the SS screws if if you want to move the item you can easily do so. However then you need to patch those holes.

sasha · 01-28-2011, 02:13 PM

Thanks guys.. Just looking at the screws and the thin plastic of the kayak. It just dont feel sturdy to me. But i guess the goop makes the diffrence. Maybe for the rods i would use the screws. But have a couple of them with bolts in case i want something that would put more strain.

Sasha

Iceman · 01-28-2011, 02:34 PM

The rivets OEX carries are actually aircraft grade aluminum, very strong, durable and hold up well to corrosion.

01-28-2011, 01:12 PM	#1
sasha Senior Member Join Date: Sep 2010 Posts: 275	pad eye When you guys install the nylon pad eyes what type of bolts or screws do you use?? It seems that most are using the self tapping screws but it just dont seem strong enough for me. Does any one has any problems with it?? Or should i stick to using bolts with washers on the bottom?? I want it done right the first time. Sasha

01-28-2011, 02:34 PM	#7
Iceman Administrator Join Date: Mar 2005 Location: 1-2 miles off the point Posts: 6,948	The rivets OEX carries are actually aircraft grade aluminum, very strong, durable and hold up well to corrosion. __________________

01-28-2011, 01:24 PM	#2
dsafety Olivenhain Bob Join Date: May 2008 Location: Olivenhain, CA Posts: 1,121	OEX stocks a very good, (although expensive), plastic pop rivet. It works very well and should be stronger than any screws. You could also use stainless bolts and nuts which can found at Home Depot or most other hardware stores. OEX probably has those as well. Bob

01-28-2011, 01:55 PM	#4
wiseguy Senior Member Join Date: Aug 2008 Location: Long Beach Posts: 427	I use the ss screws with a dab of goop as well and have never had any problems with a pad eye.

01-28-2011, 02:13 PM	#6
sasha Senior Member Join Date: Sep 2010 Posts: 275	Thanks guys.. Just looking at the screws and the thin plastic of the kayak. It just dont feel sturdy to me. But i guess the goop makes the diffrence. Maybe for the rods i would use the screws. But have a couple of them with bolts in case i want something that would put more strain. Sasha