Rod Building - Kayak Fishing Adventures on Big Water’s Edge

ship 4 brains · 12-18-2010, 08:30 PM

I would like to give rod building a shot. How have people gotten started? Does a local shop have a class, or just learn by trial and error?

dfroggy54 · 12-18-2010, 08:54 PM

A hole lotta patience and

Adam12 · 12-19-2010, 07:29 AM

Check out the rod building forum on bloody decks.

Hunters Pa · 12-19-2010, 07:57 AM

1 - Start simple

2 - be patient

3 - do it to relax

Heres a link that has my basic setup
http://www.kayaksportfishing.com/php...pic.php?t=9593

Would be happy to have you stop by if you are local or in the area. I'll show you the basics. You don't need to get a drying motor at the onset if you don't want to. Could wrap at home & have a tackle shop that builds do the flexcoat for you.

I'm in La Mirada and am off until after New Years. Wrapping is a great rainy day activity for when you can't get on the water.

dmrides · 12-19-2010, 08:06 AM

I had to replace a couple of guides once and used the rotisserie motor from my bbq as a make shift drying motor. I made a chuck out of a 2 inch pvc cap and some screws and a couple of stands out of some scrap wood and felt that I had. It was a little ghetto, but it worked great and did not cost more than a couple of bucks.

Hunters Pa · 12-19-2010, 08:09 AM

Quote:

Originally Posted by dmrides

I had to replace a couple of guides once and used the rotisserie motor from my bbq as a make shift drying motor. I made a chuck out of a 2 inch pvc cap and some screws and a couple of stands out of some scrap wood and felt that I had. It was a little ghetto, but it worked great and did not cost more than a couple of bucks.

You just described my setup that I have been using for about 10 years. I have a power wrapper, but the ghetto setup is more flexible & less unweildy

Jimmyz123 · 12-19-2010, 08:27 AM

Quote:

Originally Posted by ship 4 brains

I would like to give rod building a shot. How have people gotten started? Does a local shop have a class, or just learn by trial and error?

It's a lot of fun and yes it takes a lot of patience. Here are a few sites you'll want to become familiar with.
http://www.mudhole.com/?gclid=COjyoP...FQdMgwodgzyeoA

http://www.jannsnetcraft.com/rod-bui...FQYLbAodJl_rAg

There are instructional videos on Mud Hole and Janns and I recommend watching those as well as some YouTube.com videos. Once you learn the basics it can be applied to all repairs, and new builds. I have built 2 Freshwater rods, I am in the process of building a Seeker Tuna Stick, and have re-wrapped an old trolling rod that I have. I recommend in investing is a rod wrapping stand it will make life easier.

Holy Mackerel · 12-19-2010, 08:37 AM

Try a google search for rod wrapping videos that will help you get started. They will show you how to get the wrap started, and whipping, etc. I bought a Doc Ski video some time ago, his acid wash jeans are outdated, but it was helpful. I have fixed a lot of my rods that had a few guides messed up due to the harsh kayak fishing conditions.

Squidco has everything you need to get started.

http://www.youtube.com/watch?v=LqFgZ9cnTgI

Jimmyz123 · 12-19-2010, 08:47 AM

Quote:

Originally Posted by Holy Mackerel

Try a google search for rod wrapping videos that will help you get started. They will show you how to get the wrap started, and whipping, etc. I bought a Doc Ski video some time ago, his acid wash jeans are outdated, but it was helpful. I have fixed a lot of my rods that had a few guides messed up due to the harsh kayak fishing conditions.

Squidco has everything you need to get started.

http://www.youtube.com/watch?v=LqFgZ9cnTgI

I agree also with this post, I forgot that Squidco had all the same things you can order online, and it's a local shop. It's also better to see what you are buying.

dfroggy54 · 12-19-2010, 09:01 AM

Just to get the ball rolling..reasonable drying motor.

http://cgi.ebay.com/6-rpm-rod-dryer-...item4aa7157af6

Mudhole has got some cheaper ones too without the chuck

Mr GreenJeans · 12-19-2010, 09:41 PM

If you are looking for local classes, post your question on the Rod Builders forum on Bloody Decks. BakerStreetBobby has free classes every 1st, 3rd and 5th Wednesday at Glenn's Tackle in Costa Mesa. Not sure where you live, so that may not be close enough to help you. If there are other classes available, the folks on the BD forum will know about it.

12-18-2010, 08:30 PM	#1
ship 4 brains Senior Member Join Date: Nov 2008 Posts: 163	Rod Building I would like to give rod building a shot. How have people gotten started? Does a local shop have a class, or just learn by trial and error?

12-18-2010, 08:54 PM	#2
dfroggy54 Rolly Join Date: Feb 2010 Location: San Diego Posts: 245	A hole lotta patience and __________________ I Fish. I catch. I Eat.

12-19-2010, 09:01 AM	#10
dfroggy54 Rolly Join Date: Feb 2010 Location: San Diego Posts: 245	Just to get the ball rolling..reasonable drying motor. http://cgi.ebay.com/6-rpm-rod-dryer-...item4aa7157af6 Mudhole has got some cheaper ones too without the chuck __________________ I Fish. I catch. I Eat. Last edited by dfroggy54; 12-19-2010 at 09:13 AM.

12-19-2010, 09:41 PM	#11
Mr GreenJeans Member Join Date: Dec 2006 Location: The OC Posts: 58	Rod Building If you are looking for local classes, post your question on the Rod Builders forum on Bloody Decks. BakerStreetBobby has free classes every 1st, 3rd and 5th Wednesday at Glenn's Tackle in Costa Mesa. Not sure where you live, so that may not be close enough to help you. If there are other classes available, the folks on the BD forum will know about it.

12-19-2010, 07:29 AM	#3
Adam12 Senior Member Join Date: Nov 2008 Location: Whittier Posts: 126	Check out the rod building forum on bloody decks.

12-19-2010, 07:57 AM	#4
Hunters Pa Senior Member Join Date: Jul 2006 Location: Fullerton Posts: 1,360	1 - Start simple 2 - be patient 3 - do it to relax Heres a link that has my basic setup http://www.kayaksportfishing.com/php...pic.php?t=9593 Would be happy to have you stop by if you are local or in the area. I'll show you the basics. You don't need to get a drying motor at the onset if you don't want to. Could wrap at home & have a tackle shop that builds do the flexcoat for you. I'm in La Mirada and am off until after New Years. Wrapping is a great rainy day activity for when you can't get on the water.

12-19-2010, 08:06 AM	#5
dmrides Senior Member Join Date: Aug 2009 Location: Point Loma Posts: 584	I had to replace a couple of guides once and used the rotisserie motor from my bbq as a make shift drying motor. I made a chuck out of a 2 inch pvc cap and some screws and a couple of stands out of some scrap wood and felt that I had. It was a little ghetto, but it worked great and did not cost more than a couple of bucks.

12-19-2010, 08:37 AM	#8
Holy Mackerel Señor member Join Date: Mar 2005 Location: San Diego, CA Posts: 1,627	Try a google search for rod wrapping videos that will help you get started. They will show you how to get the wrap started, and whipping, etc. I bought a Doc Ski video some time ago, his acid wash jeans are outdated, but it was helpful. I have fixed a lot of my rods that had a few guides messed up due to the harsh kayak fishing conditions. Squidco has everything you need to get started. http://www.youtube.com/watch?v=LqFgZ9cnTgI