2009 wilderness tarpons - Kayak Fishing Adventures on Big Water’s Edge

Three3Divine · 09-04-2009, 10:13 PM

hey does any one know if you can get the scupper plugs under the seat out/unplugged cuz it makes going threw surf a pain

thanks
three3divine

Siebler · 09-04-2009, 11:22 PM

Yep just unbolt the seat and pull them out. The seat comes out with something like 4 screws, pretty easy.

JoeBeck · 09-08-2009, 09:26 AM

Yeah, I just took mine out last weekend. Easy, although I was wondering why I kept sitting in water when with the new design the seat it is supposed to drain. I'm surprised the scupper holes under a bolted down seat come plugged. Not sure the reasoning why they would do this but I would suggest if you launch through surf to take the time to remove them.

comrad_zeelaagee · 09-08-2009, 10:28 PM

i'm not sure why they took out the rear hull access port. seems to me doing this makes it far less convenient to run electrical for a bait tank. anybody with the scoop on that?

lengado4 · 09-11-2009, 09:04 PM

Took a lot of sponging to got the water out of my tarpon 100 seat last week I had a rather rough entery and exit they where not pretty and put my leash's thru the test. but any landing you can walk away from is a good one. Saw them this after noon when I was installing my fish finder. Made slides for the rails from 1/2 x1/8 aluminium flat stock drilled and tapped with 10/32 stainless bolts and nylon loops. NO holes.
Thanks

09-04-2009, 10:13 PM	#1
Three3Divine Junior Join Date: Sep 2009 Posts: 29	2009 wilderness tarpons hey does any one know if you can get the scupper plugs under the seat out/unplugged cuz it makes going threw surf a pain thanks three3divine

09-04-2009, 11:22 PM	#2
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Yep just unbolt the seat and pull them out. The seat comes out with something like 4 screws, pretty easy. __________________ CJ Siebler

09-11-2009, 09:04 PM	#5
lengado4 Junior Join Date: Aug 2009 Location: so. riv. co. Posts: 4	First thing tomorrow. Took a lot of sponging to got the water out of my tarpon 100 seat last week I had a rather rough entery and exit they where not pretty and put my leash's thru the test. but any landing you can walk away from is a good one. Saw them this after noon when I was installing my fish finder. Made slides for the rails from 1/2 x1/8 aluminium flat stock drilled and tapped with 10/32 stainless bolts and nylon loops. NO holes. Thanks

09-08-2009, 09:26 AM	#3
JoeBeck Senior Member Join Date: Nov 2008 Location: San Diego Posts: 370	Yeah, I just took mine out last weekend. Easy, although I was wondering why I kept sitting in water when with the new design the seat it is supposed to drain. I'm surprised the scupper holes under a bolted down seat come plugged. Not sure the reasoning why they would do this but I would suggest if you launch through surf to take the time to remove them.

09-08-2009, 10:28 PM	#4
comrad_zeelaagee Member Join Date: Jul 2009 Posts: 51	i'm not sure why they took out the rear hull access port. seems to me doing this makes it far less convenient to run electrical for a bait tank. anybody with the scoop on that?