Kayak Fishing Adventures on Big Water’s Edge  

Go Back   Kayak Fishing Adventures on Big Water’s Edge > Kayak Fishing Forum - Message Board > General Kayak Fishing Discussion
Home Forum Online Store Information LJ Webcam Gallery Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 02-11-2024, 05:52 AM   #1
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
Flipping your braid on your reel.....

I sure alot of guys just replace it with new.
For me I choose to flip it, what was simi old becomes new again. Plus I have a sliced knot in my line and I want it closer to the arbor. I hate feeling knots go through my guides period. This technique works for small bass reels.
When you don't want to transfer to another empty reel.
If you have alot of the same setups you could just play musical reels, and swap.
One bass reel flipping line I use a pool noodle and a piece of tape to hold your spot so if your arm get tired you can take a break just spot tape it.
Take your time and just slowly wrap around the pool noodle tightly like a spring. The bigger the line capacity the tighter the spring warp just estimate it.
Once you have all your line safely taped to the pool noodle the hard part is done. Take a break or go back to it, swap ends and tie your new arbor and just start winding with tension and letting the pool noodle flopping on the floor it will spin and unwinding it self until you come to the taped end. If you know a better way I would like to hear. I do not know how you would flip line that's to much for a pool noodle. Except reel to reel or reel to empty spool.
Attached Images
File Type: jpg 20240210_185158.jpg (54.6 KB, 39 views)
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Old 02-11-2024, 05:58 AM   #2
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
Also you could.....

Just transfer to another pool noodle Just tape and leave a 5ft gap or even 10ft what ever works for you, between pool noodles ect ect .and so on
Also if you want to wash the salt and grime out spray it with a mild dish soap and flush with clean water and hang it up to dry
The ocean has alot of floating oil too I used to wash it off my dad's and my boat.
__________________
Duke Mitchell

Last edited by MITCHELL; 02-11-2024 at 06:15 AM.
MITCHELL is offline   Reply With Quote
Old 02-11-2024, 06:50 AM   #3
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
Using multiple noodles may not work

Because of The twisting I never done it
But you would just need to experiment.
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Old 02-11-2024, 08:06 AM   #4
JohnMckroidJr
Senior Member
 
JohnMckroidJr's Avatar
 
Join Date: May 2014
Location: Fort Lauderdale
Posts: 1,945
I call it end for ending. We would do it on ships with the mooring cables. I end for end braid to get more mileage out of it. I just use some of my older rockcod reels to stow the line. Wind it onto an old 9/0 reel, then on to a 6/0, then back onto the original reel it was on and Walla, the bottom braid line is now the top, and the dried out topline is now at the bottom of the spool.
JohnMckroidJr is offline   Reply With Quote
Old 02-11-2024, 08:31 AM   #5
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
Let's see 👀.....

Quote:
Originally Posted by JohnMckroidJr View Post
I call it end for ending. We would do it on ships with the mooring cables. I end for end braid to get more mileage out of it. I just use some of my older rockcod reels to stow the line. Wind it onto an old 9/0 reel, then on to a 6/0, then back onto the original reel it was on and Walla, the bottom braid line is now the top, and the dried out topline is now at the bottom of the spool.
Top 1 becomes bottom 1. Bottom 1 becomes top2 .top 2 becomes bottom 2 and back on reel
By gorge your right I didn't think that far ahead
You just need 3 reels that's alot easier I can't think that far ahead thanks
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Old 02-11-2024, 08:35 AM   #6
MITCHELL
Sea Hunter
 
MITCHELL's Avatar
 
Join Date: Nov 2011
Location: Where ever I may roam where I lay my head I call home.
Posts: 2,277
Send a message via AIM to MITCHELL
I new there had to be an

Easier way
__________________
Duke Mitchell
MITCHELL is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -8. The time now is 01:47 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© 2002 Big Water's Edge. All rights reserved.