Truck Rack - Kayak Fishing Adventures on Big Water’s Edge

Siebler · 07-01-2008, 03:58 PM

Truck Rack will fit most pickups. Fully Adjustable in length and width to 8' long and 7' wide. Rack has 2 utility lights mounted on the front (or rear if you put it on that way). Mounts with 8 bolts. Not included but they are cheap from the hardware store(I always recommend Grade 8 however it probably isn't necessary).

Will touch up paint and such for buyer.

125.00 OBO

Located at Anglers Yak Shack or can take home in the College area.

CJ@oeexpress.com

619-518-9174

bajadog · 07-02-2008, 05:22 AM

CJ,

Is it a tubular steel rack?

Marco

Siebler · 07-02-2008, 12:28 PM

Yes it is.

Siebler · 07-02-2008, 12:35 PM

Heres a picture, not the best to show the rack but you get the idea.

The Thule saddles that are on there can be had with the rack for 150.00 total.

Siebler · 07-02-2008, 12:36 PM

Also, You dont have to put on the bars that run Length wise. I used it without them for a long time.

Grego · 07-07-2008, 09:14 PM

CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts.

Grego

Siebler · 07-08-2008, 10:53 AM

Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide.

Grego · 07-08-2008, 02:29 PM

I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

Siebler · 07-08-2008, 02:47 PM

yep 2 holes per mount.

Grego · 07-15-2008, 09:26 AM

I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.

07-01-2008, 03:58 PM	#1
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Truck Rack Truck Rack will fit most pickups. Fully Adjustable in length and width to 8' long and 7' wide. Rack has 2 utility lights mounted on the front (or rear if you put it on that way). Mounts with 8 bolts. Not included but they are cheap from the hardware store(I always recommend Grade 8 however it probably isn't necessary). Will touch up paint and such for buyer. 125.00 OBO Located at Anglers Yak Shack or can take home in the College area. CJ@oeexpress.com 619-518-9174 __________________ CJ Siebler

07-02-2008, 05:22 AM	#2
bajadog I eats what I kills Join Date: Apr 2008 Location: San Diego Posts: 393	CJ, Is it a tubular steel rack? Marco __________________ Please release bill-fish.

07-02-2008, 12:28 PM	#3
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Yes it is. __________________ CJ Siebler

07-02-2008, 12:35 PM	#4
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Heres a picture, not the best to show the rack but you get the idea. The Thule saddles that are on there can be had with the rack for 150.00 total. __________________ CJ Siebler

07-02-2008, 12:36 PM	#5
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Also, You dont have to put on the bars that run Length wise. I used it without them for a long time. __________________ CJ Siebler

07-07-2008, 09:14 PM	#6
Grego Senior Member Join Date: Mar 2005 Posts: 445	CJ, you don't happen to have a close up pic of the mounting brackets? I have a similar truck but have a soft tonneau that mounts to the inside of the bed leaving the top of the bed rails free. But I need to see if it will interfere with my tonneau mounts. Grego

07-08-2008, 10:53 AM	#7
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	Here ya go Grego. On 95.5-2000 Tacoma's the mounts are almost the exact width of the bed rail, just maybe 1/8" less wide. __________________ CJ Siebler

07-08-2008, 02:29 PM	#8
Grego Senior Member Join Date: Mar 2005 Posts: 445	I see, so I will need to drill a couple holes into the top of the bed rail. I'm going to peek around at some 95.5-2000 models. My yak truck is a 92 (pre-tacoma). I'll only need to mount the rear set because I have a thule over the roof. Right now I have the other mount coming out of my bumper hitch.

07-08-2008, 02:47 PM	#9
Siebler Senior Member Join Date: Mar 2005 Location: Richland Oregon Posts: 1,547	yep 2 holes per mount. __________________ CJ Siebler

07-15-2008, 09:26 AM	#10
Grego Senior Member Join Date: Mar 2005 Posts: 445	I'll be out of town this coming weekend, but I'm interested in coming by for a fit test. I'll coordinate through PM's.