Malibu X13 review - Kayak Fishing Adventures on Big Water’s Edge

lagachette · 06-15-2008, 07:02 AM

This is my own review of the Malibu X13 and I'll be very interested in anyone 's comments. The review was done whilst trying it out on the English channel.

Malibu X13 review part 2
http://sussexkayakfishing.50webs.org...ges/X13_2.html

In case you haven't read the first part of this review -->>
http://sussexkayakfishing.50webs.org...pages/X13.html

Shorty · 06-15-2008, 07:35 AM

Interesting review, thanks for that, not sure what the go is with the rivets not being installed properly .

BTW how much are those wheels you use ? I saw them the other day in a shop but no prices marked and all assistants busy, i thought they would be real expensive, in Australia a lot of people use furniture trolleys modified with foam, take it easy

lagachette · 06-15-2008, 11:06 AM

it's a c-tug, about £80 in the uk.
it's probably one of the dearest trolley but well worth the money

Shorty · 06-15-2008, 04:59 PM

Thanks for that, i thought they might be a bit expensive, its really handy the way they come apart and fit neatly in the hatch .

Shawn · 06-15-2008, 09:07 PM

Great review mate, probably one of the best I have read for along time, and has given me some great ideas for my own when the X-13's hit Australia on Thursday.

I recon Sean at Malibu Kayaks will have this issue well and truly sorted, he has put too much time into the developement of this baby to let a few rivots deter the successful launce and sales of what I am sure will be a "WOW" kayak.

There will always be one that slips through the net, I am only sorry that it had to happen to the X-13 and so early into its launch, I can see the vultures waitng to pounce and try and rip it to shreads, as this new boat from MK will really make people think before they buy there next yak.

Beside the water issue I am really pleased the yak performed well. I fish wide all the time, and so I am looking forward to getting it out there, be a nice to have a few more strokes up my sleeve, bring it on

All the best
Shawn

dgax65 · 06-16-2008, 12:01 AM

For a minute there I thought I had logged into a different forum

Nice review. What was the issue with the rivets? Were the holes too large or were the rivets not fastened properly?

Just about every kayak leaks to some degree. After six kayaks I know what to expect. I routinely seal every hull penetration as soon as I get the kayak.

piproto · 09-20-2009, 04:17 AM

Hello, I have just purchased Malibu Kayak's X-13 and would like to post a brief update to your review.

Malibu have removed the forward fish well and scupper in their design and the hatch now opens to the interior of the Kayak. However, this alleviates the need to install a bulkhead hatch for equipment stowage. One of the selling points that prompted my decision to buy this Kayak was the forward fish well and to say the least I was a little disappointed.

The base model comes without the flush-mount rod holders, however, if you are a little handy these are relatively easy to install. I did like the fact that it comes rigged forward and aft with bungees and the gator hatch have two additional straps (I have seen some with only two straps) on the sides standard.

While there isn't a trolley system, this leaves the option of placing the system where you want it without excess holes from unwanted placement.

Although, there is a modest amount of water leaking through the hatch, I feel that the X-13 is a solid and sexy Kayak and with the use of the seat scupper plugs provided, quite a dry ride. It tracks well, is very quick, and even for a novice such as myself, easy to turn.

All in all, the X-13 is quite lovely and I recommend it to anyone looking for a good fishing Yak.

Richard
Merritt Island, Florida

j mo · 09-21-2009, 10:31 AM

I've been on a x13 for over a year. It's as tipsy as David Hasslehoff and drinks water from nearly every rivet! The center hatch might as well not even have a cover on it as water finds it way through easily. I need to take it back in but haventt found the time.....

To be fair my center of gravity is a bit high. The second I get bit both feet go over the sides to prevent the dreaded dump, of which I had my fair share.

In retrospect I should have gone with x factor, Id give up the supposed speed of the x13 for stability any day.

keljad · 09-26-2009, 04:47 PM

Quote:

Originally Posted by j mo

I've been on a x13 for over a year. It's as tipsy as David Hasslehoff and drinks water from nearly every rivet!

Tipsy?? Looking at your avtar photo says the complete opposite. sitting side saddle with a fish that size, If thats unstable, Id love to see what you consider stable...........an oil rig maybe?

j mo · 09-26-2009, 07:31 PM

Quote:

Originally Posted by keljad

Tipsy?? Looking at your avtar photo says the complete opposite. sitting side saddle with a fish that size, If thats unstable, Id love to see what you consider stable...........an oil rig maybe?

lol You cant see my feet braced against my buddies hobie. After we burned a few pics, my buddy said "does your stern always sit that low"

thanfully he had a bilge pump, nearly lost her to the kraken!

keljad · 09-29-2009, 04:19 AM

Quote:

Originally Posted by j mo

lol You cant see my feet braced against my buddies hobie. After we burned a few pics, my buddy said "does your stern always sit that low"

thanfully he had a bilge pump, nearly lost her to the kraken!

oh..ok, that makes sense, i thought she was sitting very even considering the size of that fish.

06-15-2008, 07:02 AM	#1
lagachette Junior Member Join Date: Jun 2008 Posts: 3	Malibu X13 review This is my own review of the Malibu X13 and I'll be very interested in anyone 's comments. The review was done whilst trying it out on the English channel. Malibu X13 review part 2 http://sussexkayakfishing.50webs.org...ges/X13_2.html In case you haven't read the first part of this review -->> http://sussexkayakfishing.50webs.org...pages/X13.html

06-15-2008, 07:35 AM	#2
Shorty Member Join Date: May 2008 Location: Perth, Wild West, Australia Posts: 65	Interesting review, thanks for that, not sure what the go is with the rivets not being installed properly . BTW how much are those wheels you use ? I saw them the other day in a shop but no prices marked and all assistants busy, i thought they would be real expensive, in Australia a lot of people use furniture trolleys modified with foam, take it easy __________________ Proudly sponsored by Team No Fish and Instant Noodles Highly respected member of T.A.A (Tackle Addicts Annonymous)

06-15-2008, 11:06 AM	#3
lagachette Junior Member Join Date: Jun 2008 Posts: 3	kayak trolley it's a c-tug, about £80 in the uk. it's probably one of the dearest trolley but well worth the money

06-15-2008, 04:59 PM	#4
Shorty Member Join Date: May 2008 Location: Perth, Wild West, Australia Posts: 65	Thanks for that, i thought they might be a bit expensive, its really handy the way they come apart and fit neatly in the hatch . __________________ Proudly sponsored by Team No Fish and Instant Noodles Highly respected member of T.A.A (Tackle Addicts Annonymous)

06-15-2008, 09:07 PM	#5
Shawn Junior Member Join Date: Mar 2008 Location: Perth, Australia Posts: 8	Great review mate, probably one of the best I have read for along time, and has given me some great ideas for my own when the X-13's hit Australia on Thursday. I recon Sean at Malibu Kayaks will have this issue well and truly sorted, he has put too much time into the developement of this baby to let a few rivots deter the successful launce and sales of what I am sure will be a "WOW" kayak. There will always be one that slips through the net, I am only sorry that it had to happen to the X-13 and so early into its launch, I can see the vultures waitng to pounce and try and rip it to shreads, as this new boat from MK will really make people think before they buy there next yak. Beside the water issue I am really pleased the yak performed well. I fish wide all the time, and so I am looking forward to getting it out there, be a nice to have a few more strokes up my sleeve, bring it on All the best Shawn Last edited by Shawn; 06-16-2008 at 01:16 AM.

06-16-2008, 12:01 AM	#6
dgax65 Guerro Grande Join Date: Jan 2006 Location: Houston, TX Posts: 629	For a minute there I thought I had logged into a different forum Nice review. What was the issue with the rivets? Were the holes too large or were the rivets not fastened properly? Just about every kayak leaks to some degree. After six kayaks I know what to expect. I routinely seal every hull penetration as soon as I get the kayak. __________________ Douglas Gaxiola Team No Fish- Amateur Staff

09-20-2009, 04:17 AM	#7
piproto Junior Join Date: Aug 2009 Posts: 1	Hello, I have just purchased Malibu Kayak's X-13 and would like to post a brief update to your review. Malibu have removed the forward fish well and scupper in their design and the hatch now opens to the interior of the Kayak. However, this alleviates the need to install a bulkhead hatch for equipment stowage. One of the selling points that prompted my decision to buy this Kayak was the forward fish well and to say the least I was a little disappointed. The base model comes without the flush-mount rod holders, however, if you are a little handy these are relatively easy to install. I did like the fact that it comes rigged forward and aft with bungees and the gator hatch have two additional straps (I have seen some with only two straps) on the sides standard. While there isn't a trolley system, this leaves the option of placing the system where you want it without excess holes from unwanted placement. Although, there is a modest amount of water leaking through the hatch, I feel that the X-13 is a solid and sexy Kayak and with the use of the seat scupper plugs provided, quite a dry ride. It tracks well, is very quick, and even for a novice such as myself, easy to turn. All in all, the X-13 is quite lovely and I recommend it to anyone looking for a good fishing Yak. Richard Merritt Island, Florida Last edited by piproto; 09-20-2009 at 01:04 PM.

09-21-2009, 10:31 AM	#8
j mo Member Join Date: Jul 2008 Location: Encinitas Posts: 600	I've been on a x13 for over a year. It's as tipsy as David Hasslehoff and drinks water from nearly every rivet! The center hatch might as well not even have a cover on it as water finds it way through easily. I need to take it back in but haventt found the time..... To be fair my center of gravity is a bit high. The second I get bit both feet go over the sides to prevent the dreaded dump, of which I had my fair share. In retrospect I should have gone with x factor, Id give up the supposed speed of the x13 for stability any day.